Finally, it's done! pt. 2 *with pictures now!*
 

Yea, finally got some pics of the whole setup. I fixed the leaky oil seals in the turbo...replaced the turbo with one I borrow from my friend.

Setup:
b18b ls motor (from 98 teg)
t3 mustang svo turbo (.63/.60)
Stealthmode oil line kit w/tuner toys fittings
p06 92-95 civic dx ecu chipped, running Uberdata
450cc dsm blue top injectors w/resistor box
OverBlownMotorsports log manifold
OverBlownMotorsports intercooler (31x7x2.6)
Tial 35mm wastegate (@6 psi)
TCC works adjustable blow off valve
Custom 2.5" charge pipes
Custom 2.5" downpipe
Ractive free flow cat. converter
USDM ITR mid pipe 2.25" (2" restricted at the ends)
2.5" 5Zigen over axle muffler
VDO boost gauge (crap, I think)
Dynotune digital EGT gauge
DIY-WB wide band o2 sensor
Autometer Phantom oil pressure gauge (not installed)

Stan

PS: the holes where you see the charge pipe in the front bumper, that's where the fog lights used to be, but they got in the way of the charge pipes. Priorities! ;D

http://users.eastlink.ca/~sly1/done/IM001937.JPG
http://users.eastlink.ca/~sly1/done/IM001938.JPG
http://users.eastlink.ca/~sly1/done/IM001939.JPG
http://users.eastlink.ca/~sly1/done/IM001940.JPG
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
http://www.newbieforces.com/files/done1.JPG
http://www.newbieforces.com/files/done2.JPG
http://www.newbieforces.com/files/done3.JPG
http://www.newbieforces.com/files/done4.JPG
http://www.newbieforces.com/files/done5.JPG
http://www.newbieforces.com/files/done6.JPG
http://www.newbieforces.com/files/done7.JPG
http://www.newbieforces.com/files/done8.JPG
http://www.newbieforces.com/files/done9.JPG
http://www.newbieforces.com/files/done10.JPG
http://www.newbieforces.com/files/done11.JPG
http://www.newbieforces.com/files/done12.JPG
http://www.newbieforces.com/files/done13.JPG
http://www.newbieforces.com/files/done14.JPG
http://www.newbieforces.com/files/done15.JPG
http://www.newbieforces.com/files/done16.JPG
http://www.newbieforces.com/files/done17.JPG
http://www.newbieforces.com/files/done18.JPG

Re:Finally, it's done! pt. 2
 

Geez, that drain line is hot. I don't even think I've installed one that looked so good. I may need to use that for the "stealthmode oil line kit instruction guide" that I'm planning. (Only for ebay members it seems :P)

Re:Finally, it's done! pt. 2
 

looks good man, damn all that room, i'm seriously considering taking my a/c out, but ---- it gets hot down here :P

Re:Finally, it's done! pt. 2 *with pictures now!*
 

looks good stan :D

Re:Finally, it's done! pt. 2 *with pictures now!*
 

yea set up looks good, so does the car. good job

Re:Finally, it's done! pt. 2 *with pictures now!*
 

why'd you hack the bumper up so much :-\ how did you fit your i.c. with out hacking the center grill? i had to cut out my center grill, but didn't have to cut where the fog lights go. get a dremel and clean that ---- up man, hell i'll let you borrow mine, steak knife = NO!! ;) looks good man.

Re:Finally, it's done! pt. 2 *with pictures now!*
 

I have a dremel. I cut up the bumper a couple years ago when I had the fog lights installed, but they got in the way of my charge pipes. I didn't have to cut the front grill, I'd have to take pics of how the intercooler is mounted.

Stan

Re:Finally, it's done! pt. 2 *with pictures now!*
 

yeh
that looks good. pretty clean and everything
is this your daily driver or just project car?

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Re:Finally, it's done! pt. 2 *with pictures now!*
 

what ecu is that? you did a obd1 conversion?

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Stan, I've said it before, and I'll say it again: I love your car.

If you want to clean up that bumper, just use the sanding drum attachment for your dremel. It worked real nice on mine.

I don't know how to fix your problem, but you need to get a t3/t4 for that ls and run 10 psi. You should have a very quick car.

Re:Finally, it's done! pt. 2 *with pictures now!*
 

na, that's an obd1 to obd2 conversion harness you see there ;) i believe that's a p28

Re:Finally, it's done! pt. 2 *with pictures now!*
 

It's a obd2-obd1 conversion harness I made, running a p06 ecu from a 92-95 civic dx (non-vtec) chipped with p75 code running uberdata.

Car is a daily driver. As for the bumper, i'm trying to find a used one that doesn't have the holes drilled for the fog lights.

Stan

Re:Finally, it's done! pt. 2 *with pictures now!*
 

stan is the flange i sent you? haha

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Nice looking car, and good looking setup you have there. ::thumbs up::

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Looks good Stan!! Are you planning on going to PEI for the races this summer? Hope so I plan to be there and would like to see how you are running.

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Ahh, a local! I didn't know you were on here. My secret it out. Yep, i'll be over at PEI.

Stan

Re:Finally, it's done! pt. 2 *with pictures now!*
 

http://www.newbieforces.com/files/done11.JPG

what kind of gauge is that thing with the thing thats not very normal. I like it whatever it does.

Re:Finally, it's done! pt. 2 *with pictures now!*
 

You may have posted this before, but could you post your setup again?

Re:Finally, it's done! pt. 2 *with pictures now!*
 

My front bumper is kinda jacked too. The cheapest I've found them is actually on ebay. There are new unpainted ones all the time on there for $40 + $40 shipping. That's actually a pretty good deal for a new bumper.

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Digital EGT gauge.




List updated up top for ya.

Stan

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Wow, that pretty BOV looks mity close to that strut tower body. It could just be the angle, but one good hard shift can break that thing off. Make sure your motor mounts are solid and in good condition.

SWEET CAR AND SETUP!!!

Re:Finally, it's done! pt. 2 *with pictures now!*
 

hows the bov workin, you gettin any surge?

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Not getting any surge, but it is fluttering a bit. Sounds cool though.

I fixed the check engine light tonight.. I just came back, og my god it's fast.. 5psi!! my oem clutch is slipping, it can't handle it.

Stan

Re:Finally, it's done! pt. 2 *with pictures now!*
 

why are you only running 5 psi?? btw, you don't like that vdo boost gauge, why did you buy it? ;)

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Hey Stan, when and where are the races on the island? I might take a trip over this summer.

Re:Finally, it's done! pt. 2 *with pictures now!*
 

Not sure, beginning of May I think? Who are you? Too many locals on here I didn't know about.

Projekteg: it's a nice looking boost gauge, but it works like poop. Running 5psi (according to the gauge), but I think it's more like 6psi. I don't have a manual boost controller yet, and I need to tune the car before I up the boost any.

Stan