Finally dyno'ed my car *pic*
b18b
Probe Industries forged pistons (8.7:1 cr) Eagle H beam rods Ramhorn manifold Tial 35mm wg T3 .63/.60 30x7x2.6 intercooler, 2.5" charge pipes 2.5" downpipe, cat converter, 2.25" exhaust dsm 450cc's 10psi SAE corrected: http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg |
Re: Finally dyno'ed my car *pic*
Not bad number for being super rich all the way and lean up top. I'll richen the maps up top later tonight, only put it on the dyno to see what it's putting down at an LS before I rip it apart and do the LS/VTEC.
Sorry about the kilometers per hour, forgot to switch it to rpm. Dyno was done in 3rd gear, '98 LS tranny. |
Re: Finally dyno'ed my car *pic*
all you need to do is get that a/f figured out. this is coming from someone who's car barely runs.
|
Re: Finally dyno'ed my car *pic*
Originally Posted by Stan
Not bad number for being super rich all the way and lean up top. I'll richen the maps up top later tonight, only put it on the dyno to see what it's putting down at an LS before I rip it apart and do the LS/VTEC.
Sorry about the kilometers per hour, forgot to switch it to rpm. Dyno was done in 3rd gear, '98 LS tranny. |
Re: Finally dyno'ed my car *pic*
seams a little weak for 10psi :-\ but a vtec head will fix that up ;)
|
Re: Finally dyno'ed my car *pic*
for 10 psi hes on track plus his tune is a little off forged parts on hmt not to many of those around
|
Re: Finally dyno'ed my car *pic*
i'd say the week numbers are due to 8.7:1 c/r and only 10 psi. how much timing you running up top?
|
Re: Finally dyno'ed my car *pic*
thats lame ass hp... a d series makes that on 10 psi....
|
Re: Finally dyno'ed my car *pic*
Originally Posted by projekteg
i'd say the week numbers are due to 8.7:1 c/r and only 10 psi. how much timing you running up top?
Originally Posted by hotrex
thats lame ass hp... a d series makes that on 10 psi....
|
Re: Finally dyno'ed my car *pic*
Originally Posted by projekteg
Originally Posted by Stan
Not bad number for being super rich all the way and lean up top. I'll richen the maps up top later tonight, only put it on the dyno to see what it's putting down at an LS before I rip it apart and do the LS/VTEC.
Sorry about the kilometers per hour, forgot to switch it to rpm. Dyno was done in 3rd gear, '98 LS tranny. Stan |
Re: Finally dyno'ed my car *pic*
nice job man,
|
Re: Finally dyno'ed my car *pic*
That is by far the absolute worst AFR's I've seen in my entrie life. You're going to lose that motor in no time.
Not to mention your HP numbers are lacking. |
Re: Finally dyno'ed my car *pic*
your right, 282whp on 9 psi
|
Re: Finally dyno'ed my car *pic*
Deff seems on track for 60/63 @ 10psi. Id be happy with that. Cleaning the A/F from 13's to 12's at the end might be worth 3-8whp, and you'll sleep better at night.
|
Re: Finally dyno'ed my car *pic*
Yep, Stan I wouldn't be too disapointed with those numbers with that setup on the LS. I came out with 213 whp and 200 ftlbs. at 9 psi on my stock LS with cat and plugged up exhaust ,tuned enough to be safe but could get more power extracted if it were cleaned up a bit more. I posted that basemap at Xenocrons site but havn't played on the dyno since to update the tune and setup. But, that sounds about right Stan. After the LSVtec you will notice quite a difference.
|
Re: Finally dyno'ed my car *pic*
i would still pull a little more timing up top. running that lean and only 5* retard is a bad situation waiting to happen
|
Re: Finally dyno'ed my car *pic*
Originally Posted by Koby
That is by far the absolute worst AFR's I've seen in my entrie life. You're going to lose that motor in no time.
Not to mention your HP numbers are lacking. |
Re: Finally dyno'ed my car *pic*
not bad stany boi :D
|
Re: Finally dyno'ed my car *pic*
I already dumped some more fuel in up top. I'm not too worried about it, pretty happy with the numbers.. tearing it all apart soon to chuck this gear on:
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg |
Re: Finally dyno'ed my car *pic*
not bad ..
are u putting the wall radiator in ? ;) ;D |
Re: Finally dyno'ed my car *pic*
I dig the Muuugen vc. Rice or not it's still cool to me. Nice setup and I wanna see what it puts out once you done with the El es vee teck.
|
Re: Finally dyno'ed my car *pic*
Originally Posted by ibby
not bad ..
are u putting the wall radiator in ? ;) ;D
Originally Posted by stillnoturbo
I dig the Muuugen vc. Rice or not it's still cool to me.
|
Re: Finally dyno'ed my car *pic*
Is that my old turbo? :D Nice work Stan. :)
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: Finally dyno'ed my car *pic*
Just seen the microwave :-*
pimp civic O0 |
Re: Finally dyno'ed my car *pic*
definitely looks good man.
So you are the one that snagged boostie's turbo eh >:( :P |
Re: Finally dyno'ed my car *pic*
Originally Posted by AgentMurdoc
So you are the one that snagged boostie's turbo eh >:( |
Re: Finally dyno'ed my car *pic*
lookin good man.........can't wait to see what the ls/vtec puts down O0
|
Re: Finally dyno'ed my car *pic*
whoa thats power on an ls. with an ls/vtec set-up, there are no limits.
looks good but that is alot of compression on an ls/vtec. |
All times are GMT -5. The time now is 11:48 PM. |
© 2024 MH Sub I, LLC dba Internet Brands