Filler
 

You guys have any tips on using filler, like in the instance of filling minnor dents ... not side moldings :P . Just looking for all the steps like:

-
-
-
-
-
-
-
-
you know.. like that, what paper to use and when to use it.. Thanks!

Re: Filler
 

:8

Re: Filler
 

Re: Filler
 

Re: Filler
 

you mean like bondo? just mix the ---- according to the instructions on the can. then you sand it with rough paper till you get the high/low spots out, then use finer grit till your ready to primer. i guess that what your asking?

Re: Filler
 

for tiny ass dents glaze it

Re: Filler
 

Glaze?

Re: Filler
 

Yeah for small dents use glaze. Glaze is pretty much the same thing as bondo but 100x's better. Glaze is a lot eazier to sand and dosent leave any pin size holes like bondo, its pretty much a finishing bondo. Your going to want to use a block to sand around the holes. After that you should be able to see the dents better, you want to take some sand paper by hand and ruff up down in the dent then use your filler.

Re: Filler
 

The only reason your bondo has pin holes in it is cause ya probably get the cheap ass can of "BONDO" at walmart or the auto parts store. If you actually spring a few bucks more for the expensive stuff you'll find that it doesn't leave the holes and crap, and most of the time also sands easier ::)