General Discussion Off-Topic Discussion and Enlightenment

faster spool more boost? this is kinda crazy

Thread Tools
 
Search this Thread
 
Old 08-05-2005, 12:03 AM
  #1  
0.0 BAR
Thread Starter
 
J-SMITH69's Avatar
 
Join Date: Dec 2002
Posts: 0
Default faster spool more boost? this is kinda crazy

http://www.turbomustangs.com/forums/...threadid=45148

Originally posted by 302tt
I made a couple flanges to block off one half of my 1.0 A/R split turbine housing on my twin turbo setup. Worked great - much faster spool-up and made more boost. Worth a try if your turbine housing is too big.
J-SMITH69 is offline  
Old 08-05-2005, 12:33 AM
  #2  
3.0 BAR
 
Spenser's Avatar
 
Join Date: Aug 2003
Posts: 3,930
Default Re: faster spool more boost? this is kinda crazy

now i can use a t44 on my 1.6
Spenser is offline  
Old 08-05-2005, 01:38 AM
  #3  
3.0 BAR
 
leed's Avatar
 
Join Date: Dec 2002
Posts: 3,830
Default Re: faster spool more boost? this is kinda crazy

I see it as effectively lowering the A/R. Faster spool, and higher exhaust manifold pressure up top. Just like a smaller turbo. sounds like a cheaper way of doing it that swapping housings. (if they are even available for the particular turbo).

Good cheap idea if the spool up is hurting bad enough.
leed is offline  
Old 08-05-2005, 01:50 AM
  #4  
1.5 BAR
 
90turboteg's Avatar
 
Join Date: Nov 2004
Posts: 922
Default Re: faster spool more boost? this is kinda crazy

Originally Posted by leed
I see it as effectively lowering the A/R. Faster spool, and higher exhaust manifold pressure up top. Just like a smaller turbo. sounds like a cheaper way of doing it that swapping housings. (if they are even available for the particular turbo).

Good cheap idea if the spool up is hurting bad enough.
haha, seems like somthing you need dave MR. cough -i dont reach full spool till 5500 -cought lol, its all good thow, once your car does spool, holy ----, hold the ---- on, it does seem like a good way to make turbos spool faster, but do it my style, just make an *** manfold that has small pipes lol j/p :P
90turboteg is offline  
Old 08-05-2005, 02:07 AM
  #5  
3.0 BAR
 
87na_rx7's Avatar
 
Join Date: Jun 2004
Posts: 2,942
Default Re: faster spool more boost? this is kinda crazy

second gen rx7's use a system like that called twin scroll, at low rpm's one sid is blocked off then @ higher rpm's it opens both to give good exhaust flow. Evo's have been using that for years too
87na_rx7 is offline  
Old 08-05-2005, 03:12 AM
  #6  
1.5 BAR
 
Tatakai's Avatar
 
Join Date: Jan 2005
Posts: 1,440
Default Re: faster spool more boost? this is kinda crazy

wow.. this is like perfect timing for me

i plan on low-boosting my GSR, with a fatty turbo, just cuz it's a cheap turbo from a homie and i only want to run like 5 pounds. figured i wont get anything till about 5-6K out of 9.5K

but, now i can have my turbo GSR @ 5psi (with possibility of over 15) for like $500. sweet
Tatakai is offline  
Old 08-05-2005, 08:28 AM
  #7  
3.0 BAR
 
biggmike's Avatar
 
Join Date: Jan 2004
Posts: 2,075
Default Re: faster spool more boost? this is kinda crazy

I like this idea.
biggmike is offline  
Old 08-05-2005, 10:48 AM
  #8  
1.5 BAR
 
baldur's Avatar
 
Join Date: Aug 2003
Posts: 1,194
Default Re: faster spool more boost? this is kinda crazy

Yes, this is like what Mazda did on the single turbo RX7s.
baldur is offline  
Old 08-05-2005, 11:43 AM
  #9  
0.5 BAR
 
RabbitShit's Avatar
 
Join Date: Jan 2003
Posts: 140
Default Re: faster spool more boost? this is kinda crazy

Originally Posted by BiggMike
I like this idea.
I like this idea better. Faster spool is nice but there is so much power in high flowing exhaust. Although not being able to flow enough air to push the turbo into its efficiency range will certainly hurt you too. Perhaps buying the right turbo the first time around?

What I find interesting is that split turbines were designed so you could keep the exhaust pulses together all the way to the wheel. So really, if his manifold were designed right he'd just be capping off two cylinders.

Wait... replace the pull cable with an old internal wastegate actualtor set at like 6psi. It builds boost fast to 6psi then opens when the EGT and flow are high enough to carry it from there on up into high boost. Wow... ghetto VNT. We gotta try this.
RabbitShit is offline  
Old 08-05-2005, 01:43 PM
  #10  
3.0 BAR
 
kain's Avatar
 
Join Date: Sep 2003
Posts: 5,448
Default Re: faster spool more boost? this is kinda crazy

thats an interesting idea. but the wastegate would have to be uuberlitously big.
kain is offline  


Quick Reply: faster spool more boost? this is kinda crazy



All times are GMT -5. The time now is 12:57 AM.