Facken Shet! (This just in.. I made it work ) Pics at bottom
07-09-2006, 11:54 AM
#1
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Facken Shet! (This just in.. I made it work ) Pics at bottom
Update!!!!
Got the 89 teg shaft to work . Drilled out the wholes where they more or less needed to be and voila! done! took alot of swearing sweat and beer but we got it done. RenR and Donald Came out to give me a hand. So cal IS getting back to their old school roots of helping a ***** out. Thanks! If i had more time we would had made an adapter plate to fit in between the int shaft and back of the block. Pics at the bottom.
Ok, So no sooner to the 15th could it get ( trying to get the car ready for street legal drags) and here i am trying to get the ZC trans in the trusty four door. When low and behold the freaking Intermediate shaft the i have doesnt ------- work! Im talking bout the facken 89 teg shaft that i thought would work. Well it just so happens that the friggin wholes dont line up and there is a space of about half an inch betweent the matting surfaces of the back of the block and the intermediate shaft.I guess i could make it work but now i have to find out if the ------- axles i bought ( 89 teg axles ) work with this set up. FACk!
So with no ZC shaft available im gonna have to put the dumbass LX trans that it had before i put in the ZC trans. What a facken day it has been. Ill post pics of the nonsense later when i get home.
Can a beaner get a break?
Got the 89 teg shaft to work . Drilled out the wholes where they more or less needed to be and voila! done! took alot of swearing sweat and beer but we got it done. RenR and Donald Came out to give me a hand. So cal IS getting back to their old school roots of helping a ***** out. Thanks! If i had more time we would had made an adapter plate to fit in between the int shaft and back of the block. Pics at the bottom.
Ok, So no sooner to the 15th could it get ( trying to get the car ready for street legal drags) and here i am trying to get the ZC trans in the trusty four door. When low and behold the freaking Intermediate shaft the i have doesnt ------- work! Im talking bout the facken 89 teg shaft that i thought would work. Well it just so happens that the friggin wholes dont line up and there is a space of about half an inch betweent the matting surfaces of the back of the block and the intermediate shaft.I guess i could make it work but now i have to find out if the ------- axles i bought ( 89 teg axles ) work with this set up. FACk!
So with no ZC shaft available im gonna have to put the dumbass LX trans that it had before i put in the ZC trans. What a facken day it has been. Ill post pics of the nonsense later when i get home.
Can a beaner get a break?
07-09-2006, 12:16 PM
#3
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
Originally Posted by stillnoturbo
PM frank and have him find you some zc axles. Sorry to here bro. Oh and thanks for calling me back the other day homo! :P
07-09-2006, 12:20 PM
#4
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
Gimme a sec cause I have to run to my mom's house and pick up some stuff from my stepdad. He's been cleaning out his garage and I've been coming home with boatloads of stuff. Car ---- and old vintage auto type stuff. Old 60's Valvoline oil tanks. Just thought they were cool.
07-09-2006, 12:29 PM
#5
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
Originally Posted by stillnoturbo
Gimme a sec cause I have to run to my mom's house and pick up some stuff from my stepdad. He's been cleaning out his garage and I've been coming home with boatloads of stuff. Car ---- and old vintage auto type stuff. Old 60's Valvoline oil tanks. Just thought they were cool.
07-09-2006, 01:36 PM
#6
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
sounds cool nig. I'll be home. He gave me a brand new Dewalt cordless drill with battery and charge. More stuff to put on ebay. Old Coca-cola coolers from like the 50's..along with some other stuff. He's a big retro guy and digs that stuff. He's got like a couple of those old gas tanks with the big globes on top that light up.
07-09-2006, 02:23 PM
#7
3.0 BAR
Thread Starter
Join Date: May 2003
Posts: 5,380
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
Originally Posted by stillnoturbo
sounds cool nig. I'll be home. He gave me a brand new Dewalt cordless drill with battery and charge. More stuff to put on ebay. Old Coca-cola coolers from like the 50's..along with some other stuff. He's a big retro guy and digs that stuff. He's got like a couple of those old gas tanks with the big globes on top that light up.
07-09-2006, 02:36 PM
#8
3.0 BAR
Join Date: Feb 2004
Posts: 7,785
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
Like Ted Dibase once said "everything has a price!" 
I actually need it though cause I've been using a old skool black and decker with a cord thats probably from the 70's that I got from my stepdad too. It's like all chrome but after you use it for a while since it's all metal the ****** get mad hot and have to hold onto with my welding gloves. I have an cordless makita you can have if you can find rechargeable batteries for it. I have a charger for it and all. Just pay for the shipping cause I'm cool like that bro. It has two batteries but they don't hold a charge really good or at all. I don't remember I haven't used it in awhile. But it's yours if you want it.
Keyless chuck 9.6V. Not the greatest but it's basically free.
I actually need it though cause I've been using a old skool black and decker with a cord thats probably from the 70's that I got from my stepdad too. It's like all chrome but after you use it for a while since it's all metal the ****** get mad hot and have to hold onto with my welding gloves. I have an cordless makita you can have if you can find rechargeable batteries for it. I have a charger for it and all. Just pay for the shipping cause I'm cool like that bro. It has two batteries but they don't hold a charge really good or at all. I don't remember I haven't used it in awhile. But it's yours if you want it.Keyless chuck 9.6V. Not the greatest but it's basically free.
07-10-2006, 03:18 AM
#10
3.0 BAR
Join Date: Jan 2003
Posts: 4,401
Re: Facken Shet! Stoopid Cars and their Stoopid Axles! ARRRGHhhh
Originally Posted by Mista Bone
It has been known for YEARS ZC tranny gets ZC midshaft, teg won't bolt up.
