E-test update
#24
Re:ONTARIO HMTers PLEASE HELP *~ETEST RESULTS UPDATE*~
Originally Posted by bumblezc
Hey spoon when do you need to do this by. If you come to pick up that intercooler, We can put a timing light on it, tune it up, and I might be able to talk my buddy into letting you use his CAT, but then again it's easier to scam one from the junk yard!
I don't think you can get hotrod specs. because it's still a SOHC, if yo went to DOHC you would qualify for sure. Slap on a turbo and they might be easier on you!
I don't think you can get hotrod specs. because it's still a SOHC, if yo went to DOHC you would qualify for sure. Slap on a turbo and they might be easier on you!
#25
Re:ONTARIO HMTers PLEASE HELP
so on the weekend i took the motor out of my 91 DX and swapped it into my 89 Si keeping the MPFI but puting a stock manifold on it and a new cat. I would put up pics of the swap but the bandwith is ----.
so here are the results
LIMIT READING
HC ppm 78 19 =PASS
CO% .44 .10 =PASS
NO ppm 907 83 =PASS
CURB IDLE TEST
HCppm 200 39 =PASS
CO% 1.00 0.01 =PASS
NO ppm N/A N/A
Just a little better eh?
so here are the results
LIMIT READING
HC ppm 78 19 =PASS
CO% .44 .10 =PASS
NO ppm 907 83 =PASS
CURB IDLE TEST
HCppm 200 39 =PASS
CO% 1.00 0.01 =PASS
NO ppm N/A N/A
Originally Posted by spoon fed
LIMIT READING
HC ppm 78 191 =FAIL
CO% .44 2.48 =FAIL
NO ppm 907 2046 =FAIL
CURB IDLE TEST
HCppm 200 609 =FAIL
CO% 1.00 3.81 =FAIL
NO ppm N/A N/A
HC ppm 78 191 =FAIL
CO% .44 2.48 =FAIL
NO ppm 907 2046 =FAIL
CURB IDLE TEST
HCppm 200 609 =FAIL
CO% 1.00 3.81 =FAIL
NO ppm N/A N/A
Thread
Thread Starter
Forum
Replies
Last Post
Sinner
General Discussion
18
01-26-2004 11:52 PM