HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Dyno'd the GF's Car (https://www.homemadeturbo.com/general-discussion-6/dynod-gfs-car-27124/)

HMT-Admin 09-26-2004 11:47 PM

Dyno'd the GF's Car
 
Today at a local Acura dealership we had a Car show, and they had a mobile dyno. My GF Leia entered her RSX in the car show and we also dyno'd her h22 hatchback.

https://www.homemadeturbo.com/leia/leiadyno2.jpg

https://www.homemadeturbo.com/leia/leiadyno.jpg

Pretty decent for being street tuned, (thanks again dave!)

346whp / 263tq @ 10psi

Beautiful flat torque line, I cant beleive the H was breathing so good on the top end. Especially since the head/IM are all stock.

With some headwork, cams, Intake manifold and about 20psi, this thing should have no problem making over 500whp. ;)

Jeff

Turbo-Dan 09-26-2004 11:53 PM

Re:Dyno'd the GF's Car
 
thats pretty nuts, that thing must be unreal to drive on the street.
i dream about having a 300+hp car
that civic is such a sleeper.

any pics of the rsx?

hurleyboarder21 09-26-2004 11:54 PM

Re:Dyno'd the GF's Car
 
i saw this car today... insane. nice numbers jeff

88dx 09-26-2004 11:56 PM

Re:Dyno'd the GF's Car
 
Any pics of the cage? I need a ride in this thing sometime soon ;)
steve

Platty9 09-27-2004 12:05 AM

Re:Dyno'd the GF's Car
 
So what did u do to make an H22 be able to hold down those kind of numbers i thought that the sleeves are fairly weak??? or am i mistaken

HMT-Admin 09-27-2004 12:21 AM

Re:Dyno'd the GF's Car
 

Originally Posted by 88dx
Any pics of the cage? I need a ride in this thing sometime soon ;)
steve

No, it's not even in the car yet.. :P

And yes I'll give you a ride since you were so kind enough to let us borrow your injectors at the last min.


So what did u do to make an H22 be able to hold down those kind of numbers
The bottom end is fully built..

JDM H22 w/ Factory LSD (stock head)
Darton Sleeves
9.1 Endyn Rollerwave Pistons
Eagle H Beam rods
Balance Shafts Removed
Turbonetics 62-1 T3/T4 Turbo
Tial 40mm Wastegate (12psi spring)
Tial 50mm Blow off valve
2.5in Charge piping
Custom Coach 8in IC
Custom Turbo manifold w/ Shitbird Collector
Clutch Specialities Stage 3 Clutch w/ 7.5lb flywheel
Stealthmode Oil line kit
3.0 in Mandrel Downpipe
450cc DSM injectors to the max!!, lol
Running OBD1 P28 w/ Uberdata

Heres the old thread on her car

https://www.homemadeturbo.com/forum/...threadid=26234

Crank Horsepower is around 415 HP with a 16.5 drivetrain loss. I think one of the local guys got some video footage of the pulls.

Jeff

87na_rx7 09-27-2004 12:24 AM

Re:Dyno'd the GF's Car
 
any chance your going to jump on the h series bandwagon

88dx 09-27-2004 12:31 AM

Re:Dyno'd the GF's Car
 
Jeff you guys should come up to Mission on the 1st or 8th for the friday night street legals, last two for the year.

purpleD16 09-27-2004 12:40 AM

Re:Dyno'd the GF's Car
 

Originally Posted by Turbo-Dan
any pics of the rsx?


HMT-Admin 09-27-2004 12:44 AM

Re:Dyno'd the GF's Car
 

any pics of the rsx?
https://www.homemadeturbo.com/leia/bling2.jpg



Originally Posted by Rx7toStarion
any chance your going to jump on the h series bandwagon

Highly unlikly.. They are still a boat anchor IMO ;) jk..


Originally Posted by 88dx
Jeff you guys should come up to Mission on the 1st or 8th for the friday night street legals, last two for the year.

Nah, were going down to Woodburn next Saturday, plus I work on the 8th. You should come down with us ;)

88dx 09-27-2004 12:58 AM

Re:Dyno'd the GF's Car
 
Id go to Woodburn if I could catch a ride with someone, id go nuts driving that far in my car :'(

MikeJ-2009 09-27-2004 01:06 AM

Re:Dyno'd the GF's Car
 
How far would you trust those eagle rods? I know the hype is 20psi/600 hp, but I've been debating lately whether to build with something more bulky. I don't know. ???

Reddy 09-27-2004 01:16 AM

Re:Dyno'd the GF's Car
 
Are you going to take the turbo off that car when you need it for your car or you just going to buy another one?

HMT-Admin 09-27-2004 01:37 AM

Re:Dyno'd the GF's Car
 

Originally Posted by Stealthmode
How far would you trust those eagle rods? I know the hype is 20psi/600 hp, but I've been debating lately whether to build with something more bulky. I don't know. ???

Depends on what your goal is, if your shooting for 5-600whp the eagles should be fine. Remember the H-series Eagle rods are bigger than the B-series, so I would hope they can hold 600 at the crank. Steve since your the big stunna, you should go with some paulter rods ;)


Are you going to take the turbo off that car when you need it for your car or you just going to buy another one?
Not sure yet, I'd like to get a T-3/T67 or GT35R. We'll see when spring comes around.


Reddy 09-27-2004 01:44 AM

Re:Dyno'd the GF's Car
 
a GT35R is my dream turbo. One day i will own one, than I will own everybody 8)

baldur 09-27-2004 04:09 AM

Re:Dyno'd the GF's Car
 
The reyland escort cosworth that crashed in gumball this year had a GT35R, yielding 620 crank hp (on engine dyno) on mild race gas. 580hp on pump gas.

beerbongskickass 09-27-2004 04:46 AM

Re:Dyno'd the GF's Car
 
Awesome numbers and it's only at 10 psi!!! In Dave's words, that car is solid! HMT BBQ/sleepover at beerbong's the night before woodburn! :D Leia can I take your car for a spin around the block this weekend? ;D

bambooseven 09-27-2004 05:29 AM

Re:Dyno'd the GF's Car
 
you think that IC will be sufficient when the headwork/IM/cams?boost is all done? I can't see a tube and fin, 8x(whatever)x3" intercooler supporting 500 + WHP very efficiently. maybe I'm wrong?

HMT-Admin 09-27-2004 05:37 AM

Re:Dyno'd the GF's Car
 
It's going to be along time before thats all done, down the road well probably just end up getting a high effiencey Garrett core and making our own. There are lots of guys making 4-500whp on Tube/Fin style intercoolers, but I highly doubt any of them are using CCA's. I think its the least of our concerns right now ;)

How to get traction is the main one.


bambooseven 09-27-2004 05:43 AM

Re:Dyno'd the GF's Car
 
hehe, 4am huh?

I figured you would do something along those lines (the garret core) or buy a precision IC (which is just a premade version)

GL getting traction w/ that car and keeping it decently streetable. I think the day you'll have traction is the day you decide it is a racecar ;) 900lb + springs in the rear are not fun for the street ;)

you have anything in mind traction wise?

SkunT 09-27-2004 06:56 AM

Re:Dyno'd the GF's Car
 
:as I wipe the drool:


that thing must be insane on the street!
very very sexy numbers jeff.


as I say on most of jeffs threads
"when I grow up, i wanna be just like jeff" :)

88crxSi 09-27-2004 06:58 AM

Re:Dyno'd the GF's Car
 
wow. just, wow. only on 10psi an makin 400+ crank hp. Good work guys!

that 7.5lb FW must make that sucker rev oh so quick.

projekteg 09-27-2004 07:35 AM

Re:Dyno'd the GF's Car
 

Originally Posted by sccaeg

as I say on most of jeffs threads
"when I grow up, i wanna be just like jeff" :)

---- that, when i grow up, i wanna be jeff's gf :-* nice numbers man, now you just need to finish your car :P ;)

SETI20 09-27-2004 09:53 AM

Re:Dyno'd the GF's Car
 
Damn man.... EK, RSX, and a crx.... you must've sucked god's dick until your lips were sore.

I fixed my one and only complaint about your gf's rsx.
http://www.thinkddc.com/gallery/albu..._fix.sized.jpg

projekteg 09-27-2004 10:04 AM

Re:Dyno'd the GF's Car
 

Originally Posted by SETI20
Damn man.... EK, RSX, and a crx.... you must've sucked god's dick until your lips were sore.

I fixed my one and only complaint about your gf's rsx.
http://www.thinkddc.com/gallery/albu..._fix.sized.jpg


the hatch and rsx are his girls, and damn, what the hell did you do to those lights :P

AgentMurdoc 09-27-2004 10:21 AM

Re:Dyno'd the GF's Car
 
^ TSX/RSX headlight hybrid conversion, newest thing on the market ;)

SkunT 09-27-2004 10:39 AM

Re:Dyno'd the GF's Car
 

Originally Posted by projekteg

Originally Posted by sccaeg

...now you just need to finish your car :P ;)

gotta keep the women happy... ;)


FooK 09-27-2004 12:25 PM

Re:Dyno'd the GF's Car
 

Originally Posted by beerbongskickass
Awesome numbers and it's only at 10 psi!!! In Dave's words, that car is solid! HMT BBQ/sleepover at beerbong's the night before woodburn! :D Leia can I take your car for a spin around the block this weekend? ;D

Hey maybe my car will be outta your garage by then :)

Can I come up for the BBQ? I dunno if I'd stay, my beds more comfortable and closer to Woodburn ;)

91lsvtec 09-27-2004 09:59 PM

Re:Dyno'd the GF's Car
 
Dang those are some nice #'s
Wow Jeff you got it all..
Pretty girl, who's also into cars
whitch owns a Turbo'd H22 EK hatch and a RSX..

Better wife her ;)


All times are GMT -5. The time now is 03:39 AM.


© 2024 MH Sub I, LLC dba Internet Brands