dyno run results with uberdata thanks alot kevin
04-09-2005, 06:34 AM
#1
0.5 BAR
Thread Starter
Join Date: Mar 2005
Posts: 97
dyno run results with uberdata thanks alot kevin
04-09-2005, 07:19 AM
#2
0.0 BAR
Join Date: Jan 2004
Posts: 0
Re: dyno run results with uberdata thanks alot kevin
that looks so fake, did you make it in paint?
whats the setup?
whats the setup?
04-09-2005, 07:28 AM
#3
3.0 BAR
Join Date: Jan 2004
Posts: 5,708
Re: dyno run results with uberdata thanks alot kevin
damn insane amount of power. what are the specs on the motor?
04-09-2005, 09:03 AM
#4
0.5 BAR
Thread Starter
Join Date: Mar 2005
Posts: 97
Re: dyno run results with uberdata thanks alot kevin
damn you say fake hahaha far from iti dude.
i drew in the red line so you can see the a/f ratio and wrote in the numbers just incase they werent visible
this civic is a 96 hatch
b18c1 with wiseco pistons
eagle rods
block guard
2 255lph fuel pumps
ramhorn manifold from sfp
3" dp
2.5" ic piping
apexi fmic
550cc injectors
tial bov
tial wg 50mm
running 22psi
roll cage
stripped interior
this car will race in jersey this weekend
with only 407whp it ran an amazing 11.4 in the quarter mile! ill take some pics of it before it goes today
but this car is truely awesome..
oh last but not least have to thank kevin projekteg and uberdata
i drew in the red line so you can see the a/f ratio and wrote in the numbers just incase they werent visible
this civic is a 96 hatch
b18c1 with wiseco pistons
eagle rods
block guard
2 255lph fuel pumps
ramhorn manifold from sfp
3" dp
2.5" ic piping
apexi fmic
550cc injectors
tial bov
tial wg 50mm
running 22psi
roll cage
stripped interior
this car will race in jersey this weekend
with only 407whp it ran an amazing 11.4 in the quarter mile! ill take some pics of it before it goes today
but this car is truely awesome..
oh last but not least have to thank kevin projekteg and uberdata
04-09-2005, 09:09 AM
#5
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: dyno run results with uberdata thanks alot kevin
Since when do HP/TQ cross at 6200? all dyno maps will show that HP/TQ will cross at 5250RPM no mater what.
04-09-2005, 09:13 AM
#6
0.5 BAR
Thread Starter
Join Date: Mar 2005
Posts: 97
Re: dyno run results with uberdata thanks alot kevin
you better do some research cause this is what we got on the dyno jeff for sure.
04-09-2005, 09:19 AM
#7
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: dyno run results with uberdata thanks alot kevin
Ok, I'll do some research, lol... I'm not questioning your setup at all. I'm questioning your bogus dyno sheet. go look at every dyno graph you can find and look at what RPM torque and horsepower meet at, it should be 5252 (rounded) 5250, its a very simple formula that has been used for ever. Horsepower equals torque (in ft-pounds) times RPM divided by 5250.
Are these SAE corrected #'s? where was this dyno'd at?
You just cant honestly expect to post a dyno sheet that flat out looks bogus and expect people to believe it.
Jeff
Are these SAE corrected #'s? where was this dyno'd at?
You just cant honestly expect to post a dyno sheet that flat out looks bogus and expect people to believe it.
Jeff
04-09-2005, 09:23 AM
#8
0.5 BAR
Thread Starter
Join Date: Mar 2005
Posts: 97
Re: dyno run results with uberdata thanks alot kevin
bogus sheets like id take the time to make a bogus sheet something isnt right then cause this was done here in massachusetts and i got the sheet right from the guys printer i would never modify a dyno sheet at alll i can assure you this car will be in nj this weekend and it will run a very nice number then when it gets back here im inviting you to come out and see this monster run on the dyno and ill let you print the sheet out for yourself. bogus im not trying to impress anyone im just letting you guys know that uberdata works good thats all. i feel your taking offense on some good numbers
04-09-2005, 09:30 AM
#9
0.5 BAR
Thread Starter
Join Date: Mar 2005
Posts: 97
Re: dyno run results with uberdata thanks alot kevin
hey jeff im just looking at another dyno sheet i have on file you are right i have two of them here that are exactly 5250 on the same dyno but i came across one here that is over 6,000 ill post it sdo you can see
why does this happen then??
why does this happen then??
04-09-2005, 09:35 AM
#10
1.5 BAR
Join Date: Aug 2003
Posts: 1,341
Re: dyno run results with uberdata thanks alot kevin
22 psi on a block guard? any sleeves?
