HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Dyno Results: D15B 1.5l (https://www.homemadeturbo.com/general-discussion-6/dyno-results-d15b-1-5l-42141/)

Bizzar 07-03-2005 07:36 PM
Dyno Results: D15B 1.5l
 
Finaly got her on the dyno. No tuning nadda just my street tune. I didnt adjust a damn thing because I am taking it out next weekend to make room for the built z6. Very happy with the results. This was full exhaust bolted on too like I said what I run on the street. I suppose I could push the boost more and fine tune it but nah...

10.5 psi boost. Not shabby eh? Click the thumbnail
http://img99.imageshack.us/img99/999...dyno5eu.th.jpg

b16sellout 07-03-2005 07:37 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by Bizzar
Finaly got her on the dyno. No tuning nadda just my street tune. I didnt adjust a damn thing because I am taking it out next weekend to make room for the built z6. Very happy with the results. This was full exhaust bolted on too like I said what I run on the street. I suppose I could push the boost more and fine tune it but nah...

10.5 psi boost. Not shabby eh? Click the thumbnail
http://img99.imageshack.us/img99/999...dyno5eu.th.jpg
D15b is the turd ass hf engine right?

HondaTuner 07-03-2005 07:42 PM
Re: Dyno Results: D15B 1.5l
 
Not bad at all! :D Why don't you just keep that in her for a while? What's the z6 setup gonna be?

HMTguy 07-03-2005 07:42 PM
Re: Dyno Results: D15B 1.5l
 
d15b7 or JDM d15b vtec?

What turbo?

Nice O0

J-SMITH69 07-03-2005 07:47 PM
Re: Dyno Results: D15B 1.5l
 
95 CX hatch JDM D15B VTEC Si trans Quaife LSD
T3/T04B 54 trim FMIC 450's wideband and Uberdata
8.46@81.97mph 1/8 mile. 10.5psi Full interior plus subwoofer & 3amps

HMTguy 07-03-2005 07:49 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by random-strike
95 CX hatch JDM D15B VTEC Si trans Quaife LSD
T3/T04B 54 trim FMIC 450's wideband and Uberdata
8.46@81.97mph 1/8 mile. 10.5psi Full interior plus subwoofer & 3amps
Woops I always forget to check the obvious stuff, like the sig...

J-SMITH69 07-03-2005 07:50 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by jagojon3
Originally Posted by random-strike
95 CX hatch JDM D15B VTEC Si trans Quaife LSD
T3/T04B 54 trim FMIC 450's wideband and Uberdata
8.46@81.97mph 1/8 mile. 10.5psi Full interior plus subwoofer & 3amps
Woops I always forget to check the obvious stuff, like the sig...
:p

Bizzar 07-03-2005 08:00 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by SinisterCRX
Not bad at all! :D Why don't you just keep that in her for a while? What's the z6 setup gonna be?
Z6 bottom end
block posts
.020 bore
Wiseco 8.5:1 pistons
Eagle rods
ARP studs
Using my D15B head and cam for now.
Upping to 660cc Tunertoyz injectors and ordered a stage 3 clutch with a 11lb flywheel from Mike. My stage1 Clutchmaster cant even hold that little power lol.

SkunT 07-03-2005 08:02 PM
Re: Dyno Results: D15B 1.5l
 
in johnny and whitys words.
"sweet now go get a mustang and be fags like us"
I like it though. 8)

HondaTuner 07-03-2005 08:04 PM
Re: Dyno Results: D15B 1.5l
 
Oh. Now I can see why you're not keeping it! lol. That new build should rip rather well :D

SpankedYA! 07-03-2005 08:04 PM
Re: Dyno Results: D15B 1.5l
 
Wowo nice numbers. Good work!

Bizzar 07-03-2005 08:06 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by junkyard racer
in johnny and whitys words.
"sweet now go get a mustang and be fags like us"
I like it though. 8)
Haha there was a 5.0l Mustang there. He put down 173hp BAHAHAHAHA yeah yeah ok so he made 229tq but who cares!!

jyjck5 07-03-2005 08:11 PM
Re: Dyno Results: D15B 1.5l
 
I like I like. very nice numbers.

J-SMITH69 07-03-2005 08:13 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by Bizzar
Originally Posted by junkyard racer
in johnny and whitys words.
"sweet now go get a mustang and be fags like us"
I like it though. 8)
Haha there was a 5.0l Mustang there. He put down 173hp BAHAHAHAHA yeah yeah ok so he made 229tq but who cares!!
must run like -------.

they are rated at 225hp 300 torque at the flywheel

mine put down 228hp and unknown torque h/e at the wheels.

FooK 07-03-2005 08:15 PM
Re: Dyno Results: D15B 1.5l
 
god i wish we'd have another dyno day soon, i want to see what mine will do.

butt dyno guesses 210-220 maybe.

leed 07-03-2005 08:47 PM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by FooK
god i wish we'd have another dyno day soon, i want to see what mine will do.

butt dyno guesses 210-220 maybe.
I second that. Im ready, Im sure Jeff is a bit curious, and hopefully Dustin will have his VW together soon. Steve is almost done with is LSvtec too.

Bizzar 07-03-2005 09:18 PM
Re: Dyno Results: D15B 1.5l
 
Thanks for kind words :) To add to this I didnt realize the dyno runs had the temp and alt. So..

93.9 degrees 47% humidity 4500' alt

the standard corrected output is 198.28hp 167.4 TQ

idiot-stick 07-04-2005 09:32 AM
Re: Dyno Results: D15B 1.5l
 
Nice numbers. I'm running 14psi on mine right now. Bastard refuses to blow up

samson 07-04-2005 10:20 AM
Re: Dyno Results: D15B 1.5l
 
Originally Posted by SloS13
Nice numbers. I'm running 14psi on mine right now. Bastard refuses to blow up

LMAO!!! Most people want to push the limits and hold there without breaking anything. Not you thought. LOL. ;D



JP

ibby 07-04-2005 12:59 PM
Re: Dyno Results: D15B 1.5l
 
impressive :D

B16CRXT 07-04-2005 01:04 PM
Re: Dyno Results: D15B 1.5l
 
damn, I was hoping it was a D15B2. I am going to boost my dads 89 sedan DX in a few months :)


All times are GMT -5. The time now is 07:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands