im having trouble starting up my car,i think i did all the wiring right, the thing im confuse is the distributor, i just connect each wire that is the same color to it. and i have left the blue/yellow and blue/green strip and connecting them to c1 and c2 but still my car does not want to start,and would it work if i use a pm6 from a dohc zc to do the dpfi to mpfi, or do i need the sohc pm6 ecu to get it to start.
When i try to start it its sound like its back firing. please helpp!!

 

yes i did, does anyone have a wiring diagram on connecting the distributor from the si to the dx, from looking at it ,connecting the right color is not how its done, and i need to know which color of the si distributor goes to the dx plug.

 

put this in the hybrid section



and i bet its your plug wires into your dizzy. your firing order is off. in the haynes manual, its a bit confusing.

 

https://www.homemadeturbo.com/forum/...threadid=28002