Detailed: 2004 Toyota Tacoma (Red)
10-01-2007, 03:41 PM
#1
1.0 BAR
Thread Starter
Join Date: Jul 2004
Posts: 381
Detailed: 2004 Toyota Tacoma (Red)
Well, it's nice to be using my camera again! This one belongs to one of my local bankers here in Blue Ridge. I've done some repo's for him and the bank in the past. This Tacoma will be given to his son, tomorrow, for his 16th birthday. I did more on this one than I should have but I had nothing else today and I wanted to learn Menzerna's Nano (106) some more.
Here's the process...........
Wash Cycle:
NXT Tech Wash & Purple Power Pre-Wash
(20 oz. of wash and 12 oz of the degreaser applied via foam gun)
This mix is my go-to pre-soak. It works well at cleaning bugs, tires, and rims. I let the foam soak for 5 minutes and then rinse. I follow with a DP Four -in- One rinseless wash. Drying is handles by a Guzzler.
Tires, Wells, & Engine Bay:
(Armor All Tire Foam after cleaning foam)
The bay, wells, and tires were coat in Armor All Tire foam and let sit. The engine was the started and let run for 20 minutes to bake. The tires and trim were then treated to a coat of Armor All Tire Gel. Looked nice on the fender flares.
Paint Correction:
Menzerna's PO106ff
(Applied with Cyclo and EDGE2K Yellow Pads)
Today was an experiment to try to handle the dusting that comes with this awesome polish. I first wet the pads with a QD mix of Four -in- One. I rubbed the solution into the pad. I then put two, tiny drop of PwS onto each pad. I rubbed this into the pad by hand as well. Ok. On to polishing now. When I came to each section of the truck (door panel, hood, etc.), I would use ONE dime sized drop of 106 per Cyclo pad (it has two pads). Guess what? No dusting and the polished wonderful abilities were not hindered at all! I want someone else to try this out and give me some feed back with this process. Use your own QD too. This polish is simply awesome. I don't see me using anything else for a long time.
Paint Protection:
Poorboy's EX
(Applied with Cyclo and EDGE2K White Pads)
I've had a sample of this for a while now (thanks supercharged) and have not used it. Someone told me I needed to try it out on red so here goes. Wow! The carnauba in EX really made it the red deepen and appear wet. Reminded me a lot of Souveran liquid. I'm pretty happy with this LSP. I will have to use up the remaining amount so I can get more!
The interior was in perfect shape. No pics required for it. Just a vacuum and wiped down.
Befores........
Some foam.......
Here's the process...........
Wash Cycle:
NXT Tech Wash & Purple Power Pre-Wash
(20 oz. of wash and 12 oz of the degreaser applied via foam gun)
This mix is my go-to pre-soak. It works well at cleaning bugs, tires, and rims. I let the foam soak for 5 minutes and then rinse. I follow with a DP Four -in- One rinseless wash. Drying is handles by a Guzzler.
Tires, Wells, & Engine Bay:
(Armor All Tire Foam after cleaning foam)
The bay, wells, and tires were coat in Armor All Tire foam and let sit. The engine was the started and let run for 20 minutes to bake. The tires and trim were then treated to a coat of Armor All Tire Gel. Looked nice on the fender flares.
Paint Correction:
Menzerna's PO106ff
(Applied with Cyclo and EDGE2K Yellow Pads)
Today was an experiment to try to handle the dusting that comes with this awesome polish. I first wet the pads with a QD mix of Four -in- One. I rubbed the solution into the pad. I then put two, tiny drop of PwS onto each pad. I rubbed this into the pad by hand as well. Ok. On to polishing now. When I came to each section of the truck (door panel, hood, etc.), I would use ONE dime sized drop of 106 per Cyclo pad (it has two pads). Guess what? No dusting and the polished wonderful abilities were not hindered at all! I want someone else to try this out and give me some feed back with this process. Use your own QD too. This polish is simply awesome. I don't see me using anything else for a long time.
Paint Protection:
Poorboy's EX
(Applied with Cyclo and EDGE2K White Pads)
I've had a sample of this for a while now (thanks supercharged) and have not used it. Someone told me I needed to try it out on red so here goes. Wow! The carnauba in EX really made it the red deepen and appear wet. Reminded me a lot of Souveran liquid. I'm pretty happy with this LSP. I will have to use up the remaining amount so I can get more!
The interior was in perfect shape. No pics required for it. Just a vacuum and wiped down.
Befores........
Some foam.......
Afters...
Some more shots........
The headlights were done with 106 as well.........
Some messy pad shots.........
The headlights were done with 106 as well.........
Some messy pad shots.........
10-01-2007, 05:20 PM
#4
3.0 BAR
Join Date: Apr 2005
Posts: 6,036
Re: Detailed: 2004 Toyota Tacoma (Red)
Originally Posted by QikEnuF
Nice truck...
How would you suggest getting black mold off of a white convertible top?
How would you suggest getting black mold off of a white convertible top?
you havent posted in awhile jman, i always like looking at the before and afters, pretty sweet
10-01-2007, 06:05 PM
#5
3.0 BAR
Join Date: Mar 2003
Posts: 21,479
Re: Detailed: 2004 Toyota Tacoma (Red)
Looks good. The engine bay came really clean. 
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
That is a nice little truck that is a lucky kid to get a ride like that for a birthday gift.
10-01-2007, 07:08 PM
#9
1.0 BAR
Thread Starter
Join Date: Jul 2004
Posts: 381
Re: Detailed: 2004 Toyota Tacoma (Red)
Originally Posted by Secondaries
I've always heard not to spray the engine as you run the risk of shorting something like the alt. Do you do anything special to avoid this or do you just let 'er rip?
10-01-2007, 07:10 PM
#10
1.0 BAR
Thread Starter
Join Date: Jul 2004
Posts: 381
Re: Detailed: 2004 Toyota Tacoma (Red)
Originally Posted by QikEnuF
Nice truck...
How would you suggest getting black mold off of a white convertible top?
How would you suggest getting black mold off of a white convertible top?
El Linko........
http://www.autogeek.net/303.html
