Columbia river mandrel bending...
Does anyone from there post here? I'm trying to order from them but i'm not getting any responses back from my emails...
|
Re: Columbia river mandrel bending...
they're pricey as ---- on shipping, half of your parts cost will be your shipping total.
|
Re: Columbia river mandrel bending...
They quoted me $40 for shipping on a 3" exhaust kit...This is to Canada with USPS, so that sounds pretty good to me. I've emailed buddy 3 times since his initial response, i'm just wondering if he's on Vacation or something and there is somebody else to get ahold of. I'd just call them, but i'm not near a phone when they're open.
|
Re: Columbia river mandrel bending...
just place the ------- order, and wait 3 weeks to get it.
|
Re: Columbia river mandrel bending...
like said before, I got raped on shipping.
|
Re: Columbia river mandrel bending...
Originally Posted by ratcityrex
like said before, I got raped on shipping.
|
Re: Columbia river mandrel bending...
only way I was able to get a hold of them was by calling
|
Re: Columbia river mandrel bending...
stupid ------- ------s STFU and use DLH like they tell you too.
the northwest is a shipping dead zone, all shipping from there is expencive ya god damned twits |
Re: Columbia river mandrel bending...
shipping is definatley not over priced. you do realize a box of 16g 3" steel bends doesnt weight 4 pounds right? :1
i pay $15+ to ship a 4 pound log manifold through USPS priority mail. so if your paying $40 for a 20 pound box cross counry thats not bad. |
Re: Columbia river mandrel bending...
Exactly, i didn't think $40 was unreasonable at all. Especially being in Canada, as normally most places just rape you automatically without even looking...I love on ebay when something is $14.99 for shipping to US, and $59.99 to ship to Canada...
|
Re: Columbia river mandrel bending...
You crybaby ass ----------ers.
Would you rather they charge what many other charge for mandrel bends plus the shipping costs? I have ordered through them a couple of times. Awesome deal on both occasions. Besides, if you are that cheap, go muffler shop dumpster diving. O0 |
Re: Columbia river mandrel bending...
---- that ----!!!!! Its kinda a scam You get all pumped that its a good deal, put it in the cart and go to check out and then you find out shipping is just as much as the item. Its just like ebay where you pay .01 for the item and $129.99 shipping
|
Re: Columbia river mandrel bending...
Originally Posted by ratcityrex
---- that ----!!!!! Its kinda a scam You get all pumped that its a good deal, put it in the cart and go to check out and then you find out shipping is just as much as the item. Its just like ebay where you pay .01 for the item and $129.99 shipping
BTW this is to the middle of the U.S. |
Re: Columbia river mandrel bending...
Originally Posted by ratcityrex
---- that ----!!!!! Its kinda a scam You get all pumped that its a good deal, put it in the cart and go to check out and then you find out shipping is just as much as the item. Its just like ebay where you pay .01 for the item and $129.99 shipping
|
Re: Columbia river mandrel bending...
Shipping is REALLY expensive now. What used to be $5 to ship is now $10 due to gas prices and inflation. It seems every quarter we get a letter or email saying that shipping prices are going to go up 5-10%.
You could try to contact AceStainless or http://www.mazzurisuper.com/ and see if they give you a better price, but in the end with the HMT discount, Columbia River seems pretty reasonable. |
Re: Columbia river mandrel bending...
anyone complaining is a god damned morning.
again: 1, it comes from Oregan, not the middle of the god damned country douche nose. the north west is a bad zone to ship to anywhere but the northwest http://www.dhl-usa.com/groundMaps/jsp/GroundMaps.jsp http://www.ups.com/maps/ http://www.fedex.com/grd/maps/MapEntry.do Thank you for visiting Columbia River Mandrel Bending. ... Shop Address: 184 S 15th St. Saint Helens, OR 97051 3, we're not even paying a processing/handling fee for standard length pipes 1.5", 16ga T304 stainless tube = nominal .9962lb/ft, sold in a 6' length = 5.9772 lbs. Shipping quote from Racing Solutions to my zip 35117 = $10.15.usd Shipping from a single person from their zip, to my zip, using your own fitted packaging: $16.62 USD Calculate Time and Cost Time and Cost Summary Ship From: 35117, UNITED STATES Ship To: MOUNT OLIVE, 35117, UNITED STATES Shipment Date: Tuesday, December 11, 2007 Total Shipment Weight: 6 lbs. Daily Pickup: No Drop-off / Pickup: I will pay shipping charges and ship my package at a retail location such as The UPS Store® or UPS Customer Center Find Locations Address Type: Commercial Number of Packages: 1 Package Weight Dimensions / Packaging Declared Value Notices 1 6 lbs. 72 x 2 x 2 in. / My Packaging 8.65 USD Rates By Service Service Days In Transit Guaranteed By Total UPS Express Critical Same Day* Same Day* See Note* Get a UPS Express Critical Quote UPS Next Day Air® Billable Weight: 6.0 lbs. 1 By End of Day Wednesday December 12, 2007 38.84 USD* UPS Ground Billable Weight: 6.0 lbs. 1 By End of Day Wednesday December 12, 2007 16.62 USD* Rates may vary at retail locations. Result estimates calculated by UPS: Tuesday, December 11, 2007 5:29 P.M. Eastern Time (USA) * Rate includes a fuel surcharge. * Based on Flight Availability. Not available at UPS Retail Locations. Please visitUPS Express Critical or call 1-800-714-8779 for rates and additional details. if you want elcheapo shipping simply call them to place your order and they'll send it via DLH's fag yellow cheap shipping. so go grab a tampon you bleeding peter puffers |
Re: Columbia river mandrel bending...
Originally Posted by Toysrme
anyone complaining is a god damned morning.
|
Re: Columbia river mandrel bending...
sorry i forgot a word. insert, "suckers". as in sucking your partner's -----yzer
btw, love the new avatar, lol |
Re: Columbia river mandrel bending...
I had good luck with these guys, shipping did end up a bit more than expected, but the box was pretty big, and by the time the HMT discount kicks in it wasn't bad at all. I'd call, they were good to talk to and fixed it up and shipped it out that day if my memory serves correct.
|
Re: Columbia river mandrel bending...
i bought 1ft of 3" ms, with one 180º bend, shipping was $30.
|
Re: Columbia river mandrel bending...
Originally Posted by c0mpl3x
i bought 1ft of 3" ms, with one 180º bend, shipping was $30.
See thats the ---- im talking about....... ------- rip off! |
Re: Columbia river mandrel bending...
Originally Posted by ratcityrex
See thats the ---- im talking about....... ------- rip off! |
Re: Columbia river mandrel bending...
i used to buy all my piping from them.. 4 days later it was here is VA at my door.. i love them and would buy again if i ever needed too. i found a place that is like an hr from me that i can get bends from a little cheap and i can pick them up
|
Re: Columbia river mandrel bending...
Buddy got back to me today, and i sent payment. Here's hoping it gets here before xmas.
|
Re: Columbia river mandrel bending...
formerly racing solutions perhaps?
|
Re: Columbia river mandrel bending...
Originally Posted by FooK
formerly racing solutions perhaps?
|
Re: Columbia river mandrel bending...
Originally Posted by snm95ls
|
Re: Columbia river mandrel bending...
Originally Posted by FooK
formerly racing solutions perhaps?
I ordered from them shortly after they became a sponsor here.
Originally Posted by 90dx
So its $25 to ship a big ass box of pipes that is probably fairly heavy wow what a rip ::) What do you think it should be $5 :1
O0 |
Re: Columbia river mandrel bending...
Originally Posted by trevor72
I had good luck with these guys, shipping did end up a bit more than expected, but the box was pretty big, and by the time the HMT discount kicks in it wasn't bad at all. I'd call, they were good to talk to and fixed it up and shipped it out that day if my memory serves correct.
|
Re: Columbia river mandrel bending...
$130 got me enough 3" mandrel bent tubing to do my DP/ full exhaust(minus straight pieces obviously) and a 3" V-band, and it got here in less than a week coming across the border, i'm very impressed.
|
Re: Columbia river mandrel bending...
Originally Posted by sohcpwr
HMT discount?! I've never gotten a discount there... is there a code or something?
|
All times are GMT -5. The time now is 02:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands