HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   General Discussion (https://www.homemadeturbo.com/general-discussion-6/)
-   -   Car still won't start is it relays? (https://www.homemadeturbo.com/general-discussion-6/car-still-wont-start-relays-7051/)

InfernoSoul 07-05-2003 02:00 PM

Car still won't start is it relays?
 
My goddamn ------- car still won't get fuel or spark!!! I have replace the fuel pump, filter, distributor, ignitor, coil, cap, wires, plugs, tested my ecu to make sure it still works, and replaced the main relay(which was $65.00) for the fuel pump and ignition, i also check all the fuses and they all are good, I've added and replaced all grounds on the car. Is there any other relays that i could check or look at that could stop my car from getting fuel or spark? I have 1991 Honda Civic Si with a 1st gen ZC swap...the motor is stamped ZC but it could be a D16A1. I am using the stock Si ecu. Any help would be greatly appericated, i would really like to get this damn car running as soon as possible.

Thanks,
-InfernoSoul

Dr.Boost 07-05-2003 02:25 PM

Re:Car still won't start is it relays?
 
Something tells me it has something to do with the ECU.

Has it ever ran?
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

InfernoSoul 07-05-2003 03:55 PM

Re:Car still won't start is it relays?
 
No, I've been working on it for mounths when i got ready to start it I found out i wasn't getting any spark or fuel and have been replacing ---- snice then still the car has yet to get any spark or turn the fuel pump on. I also want to add that the ECU worked great with the motor that was originally in the car, the D16A6. I'm using the the ZC wiring harness that came with the motor i have in there...could that be the problem should i use the D16A6 wiring harness?

Thanks
-InfernoSoul

davcivic 07-07-2003 02:05 PM

Re:Car still won't start is it relays?
 
Check this out, it was one of my problems, the main relay

http://www.markl.f9.co.uk/howto/elec...main-relay.htm

88crxSi 07-07-2003 04:59 PM

Re:Car still won't start is it relays?
 
It might be the harness. I know for a d16a6 you swap motors and ecu and thats it. You didnt have to change the harness and its possible that is the problem.

I have one other suggestion. It's a long shot, but if what Im about to say IS the problem you are going to kick yourself in the ass.

CHECK FUSES :)

good luck.


All times are GMT -5. The time now is 07:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands