Can someone Identify This conversion harness??

Reply Subscribe

Thread Tools

Search this Thread

09-21-2008, 10:46 PM

HMTdmc

Guest

Posts: n/a

Can someone Identify This conversion harness??

Yeah I'm getting some wierd cel problems and I need to make sure everything is right.
the xenocron wire color instructions don't match neither do rywire or boomslang.
Anyone know what brand it is?

09-21-2008, 11:03 PM

Guy-Fast

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re: Can someone Identify This conversion harness??

jdmshit

09-21-2008, 11:06 PM

Smith-02

0.0 BAR

Join Date: Apr 2006

Posts: 0

Re: Can someone Identify This conversion harness??

chingchongmeow.com

09-21-2008, 11:49 PM

Tom-Guy

0.0 BAR

Join Date: Feb 2003

Posts: 0

Re: Can someone Identify This conversion harness??

---- wire color instructions.

When you are looking into the harness where an OBD1/2 distributor plugs in, it is the same as looking at the backside of the B-plug.

B11 B13 B15
B12 B14 B16

I forget if the IGO pin and blank spot are on the right or left, just orient the release tabs upward and it'll work out fine.

09-22-2008, 12:25 AM

HMTdmc

Guest

Posts: n/a

Re: Can someone Identify This conversion harness??

the distributor is good. this harness had a few cut wires on it between ecu plugs and I'm trying to decide what to do with them. one was A26 on the obd1 plug the other was A23

09-22-2008, 12:34 AM

HMTdmc

Guest

Posts: n/a

Re: Can someone Identify This conversion harness??

Quote:

Originally Posted by Dmc1

the distributor is good. this harness had a few cut wires on it between ecu plugs and I'm trying to decide what to do with them. one was A26 on the obd1 plug the other was A23

Two black wires T into them and go to the subharness. I think those would be used for ground if your running obd1 injectors with no resistor box. as of right now I have them both grounded on the tstat housing. I'm thinking of just cutting them. they should be grounded in the cars harness maybe it;s just redundent having then grounded again

09-22-2008, 12:46 AM

buk9tp

3.0 BAR

Join Date: Oct 2005

Posts: 9,282

Re: Can someone Identify This conversion harness??

Quote:

Originally Posted by Dmc1

the distributor is good. this harness had a few cut wires on it between ecu plugs and I'm trying to decide what to do with them. one was A26 on the obd1 plug the other was A23

A23/BLACK - ENG. GROUND (THERMOSTAT)/ PGMFI MAIN RELAY PIN 3
A26/BLACK-RED - ENG. GROUND (THERMOSTAT)

09-22-2008, 04:07 PM

HMTdmc

Guest

Posts: n/a

Re: Can someone Identify This conversion harness??

Yeah thats what I figured to Buk.
I had another harness in my basement that I snagged from the junkyard. So I swapped it in and the cel's went away It must be a short somewhere in the harness so Where ever the problem is I don't feel like cutting through all that hot glue to ---- with it ,oh well I'm just glad my other harness worked.