BOOSTED with problems
 

is the missing link supposed to suck ? my car idles like ---- my manni has a small leak between the turbo and the manni can that be way ,before it leaked the car was running really good !man i was so excited to have finished that with no charge pipe i drove around for a while man that thing sounds nice when it spools, when im in first gear and the turbo spools (around 3000k-3,500) it kinda jerks is that normal ?and ---- the crappy bosch bov even sounds nice (can hardly hear it over the spooling

Re:BOOSTED with problems
 

i don't think an exhaust leak would affect your idle. post this in the forced induction section and we'll get it figured out for you. you may have a vacuum leak somewhere that will ---- with your idle for sure. also, do you have any cel's?

Re:BOOSTED with problems
 

no cels

Re:BOOSTED with problems
 

does your idle jump up and down continuously? if so, i almost gurantee it's just a vacuum leak. check all your vacuum fittings again, maybe something came loose.

Re:BOOSTED with problems
 

no it doesnt jump its stable until i uncover the hole in the missing link then it just dies out ,and by the way ---- jb weld that ---- let me down i used it to fill a small space on the manni and t3 and the ------- jb melted off and disappeared

Re:BOOSTED with problems
 

jb weld is only good for 500*

Re:BOOSTED with problems
 

You mean you take out your map sensor to open the missing link hole?you have something like this right? under the map sensor in the TB right?
http://www.synapseengineering.com/ml001_w_homepage.jpg

If it is like that^^^^^^^there's only one hole, the one that connects to the map sensor that should not be uncovered. I don't get it maybe I'm stupid

Re:BOOSTED with problems
 

damn dumbass from napa told me it will hold

Re:BOOSTED with problems
 

what kind of management do u have???

Re:BOOSTED with problems
 

obviously nothing champ if he's running the missing link