BLeeding brakes ASAP
what is the order/pattern for bleeding brakes(89civic)
|
Re:BLeeding brakes ASAP
AFAIK
rear passanger rear driver front passager front driver. |
Re:BLeeding brakes ASAP
RF, LR, RR, LF... but this doesnt matter unless you just changed a proportioning valve.
just get a bottle of dot3 fluid, fill up your master to the brim, open all your bleeders at once til they drop clear of new fluid, then close em off. |
Re:BLeeding brakes ASAP
What he said ^
|
Re:BLeeding brakes ASAP
Doesn't matter a flying ---- which order you do them. I have been to old school coarses that tell you orders but now its been decided that it doesn't matter. ;)
|
Re:BLeeding brakes ASAP
it does matter on some cars, nothing of a obd0 honda which does not contain nor involve an abs system, on some cars *cough* toyota Avalon *cough* is a piece of ---- and if you dont do it perfect in sequence it will throw the ABS light to come on, which will also incur the Traction control light to flash, stupid f'n yota.
|
Re:BLeeding brakes ASAP
Originally Posted by ZC EF 4dR
it does matter on some cars, nothing of a obd0 honda which does not contain nor involve an abs system, on some cars *cough* toyota Avalon *cough* is a piece of ---- and if you dont do it perfect in sequence it will throw the ABS light to come on, which will also incur the Traction control light to flash, stupid f'n yota.
|
Re:BLeeding brakes ASAP
baller cars? are you nuts? only murdoc has the baller ish. :) thats why we do homemade ---- =D
|
Re:BLeeding brakes ASAP
who needs brakes?
thats what downshifting is for.. ;D oh by the way.. 95 civic. i go from the farthest to the nearest brake... two reasons. i was shown that way.. and when you get down you are closer to driving the car.. ;) |
Re:BLeeding brakes ASAP
Originally Posted by ZC EF 4dR
RF, LR, RR, LF... but this doesnt matter unless you just changed a proportioning valve.
just get a bottle of dot3 fluid, fill up your master to the brim, open all your bleeders at once til they drop clear of new fluid, then close em off. |
Re:BLeeding brakes ASAP
pump brakes till stiff(two person job), hold pressure on pedal, open bleeder screw, have person holla when pedal all the way down, close screw and repeat till no air bubbles, then move to next wheel. i like to go around twice to be sure, dont think its neccesary though. you need a little hose into a bottle of brake fluid so no air gets sucked in.
|
Re:BLeeding brakes ASAP
cool thanks mike
|
Re:BLeeding brakes ASAP
heres pictures if it helps
http://www.honda-tech.com/zerothread?id=925064 |
Re:BLeeding brakes ASAP
Thanks again for your help!!!!
if this doesn't work your gonna have to come help though LOL jk |
All times are GMT -5. The time now is 01:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands