billet terminations
 

I was having problems with my aluminum charge pipes getting bent b/c I always overtightened the t-bolt clamps.
So, I noticed these on Racing Solutions site. They are billet so, probably wont bend as easy. Well see. BTW I like that they have the bead to stop the couplers from slipping off.
Thats is all.

Attachment 21835

Re: billet terminations
 

I always have run steel charge pipes so I never had that issue

Re: billet terminations
 

Most HMT guys prob do also, I got the alum pipes from Racing Solutions.

Re: billet terminations
 

Steel+coat hanger FTW

Re: billet terminations
 

Never thought of that, ...pretty resourceful.

Re: billet terminations
 

You just need to form a bead around your charge pipes. Do as 88dx suggested. Get a coat hanger or something you can wrap around your charge pipes and epoxy(this means JB weld) it to the charge pipe. I'd imagine those billet solutions being pretty expensive for no reason.

Re: billet terminations
 

Seems like a lot of cash for nothing. You have to weld them on anyway, so if you can weld alum, just lay a bead around the pipe end.

Re: billet terminations
 

seems like a good idea, but theres so many alternatives that are free or very cheap that these probably arent worth the money

Re: billet terminations
 

$15 each. Dosent solve the prob that I was crushing the soft alum. Im not suggesting anyone buying them, I just never seen them b4, and wanted to show them to all who havent seen them either.

Re: billet terminations
 

All you need is a Lip at the end of the pipe. The T-bolts dont have too be that tight. Spray paint the pipes and clamp the couplers down with the paint still wet they wont come off ;)