Anything stronger than JB weld??
 

Trying JB weld in a socket to pull that easy out off of the plug... letting it set over night.. think i'll put enough torque on that socket to break that JB weld??? If it does break, any other suggestions?

Re: Anything stronger than JB weld??
 

I had got this stuff at pepeboys, it looked like quicksteel, but it was like jb weld on steroids.

Re: Anything stronger than JB weld??
 

marinetex holds 3500psi

Re: Anything stronger than JB weld??
 

i got some stuff from hf quick dry. Uber super glue doesnt chip easy. was like a buck

Re: Anything stronger than JB weld??
 

Seriously I would prolly take that head off, if you know the threads are messed up you may have to helicoil it anyway.

Re: Anything stronger than JB weld??
 

if JB doesn't work and it just rounds it again. I'm going to drill the bitch out down a 1/2" past the plug threads that are left in.. and leave the rest of the ez out.. then run that stubby snap on easy out in w/ the socket head on it. and i should be game.. unless the plug threads break again and leave the rest of the ez out and threads in.. which i'd just drill the rest out and make sure the piston was TDC.. then use my long magnet extension and pull everything out. :6 i've got a plan

Re: Anything stronger than JB weld??
 

Doing all I can before I invest about 2 days of labor and more $

Re: Anything stronger than JB weld??
 

i had a compression tester get stuck and i tried to use jb weld like you are talking about. it didn't work.
it's much easier to take the head off 8)

Re: Anything stronger than JB weld??
 

quit being a cheapass and take the head off to take out all the broken metal bits your ------- around is going to leave in there for your valves to eat.

Re: Anything stronger than JB weld??
 

jb weld is what's holding the statue of liberty together.

Re: Anything stronger than JB weld??
 

Lazy fucker remove the head.

Re: Anything stronger than JB weld??
 

Re: Anything stronger than JB weld??
 

the statue of liberty is MADE out of jb weld :6

Re: Anything stronger than JB weld??
 

lol, fixed it without removing the head man. and teh JB weld thing did NOT work.. it didn't do worth a ---- actually, just crunched it all up in the socket and it all spun out.. Stud extractors ------- rock, that tool saved my ass.. and a 14mm tap saved my ass on the retapping of the plug hole

Re: Anything stronger than JB weld??
 

14x1.0? retap it to 18x1.0 ford 300 plugsize.

Re: Anything stronger than JB weld??
 

so you started the car up or what

when do we get vids

Re: Anything stronger than JB weld??
 

How are you rethreading and getting the pieces out?

Re: Anything stronger than JB weld??
 

Stick to Hondas, problem solved :8.

Re: Anything stronger than JB weld??
 

Word. Just pull the head. It thought this thing needed work anyway.

Re: Anything stronger than JB weld??
 

lol i think he had a honda that the compression tester got stripped in the head or some ----

Re: Anything stronger than JB weld??
 

did you try super glue already? it works wonders O0

Re: Anything stronger than JB weld??
 

yeah my compression tester got stuck on a 91 civic sedan.
dumbest ------- ---- ever.

Re: Anything stronger than JB weld??
 

JB Weld > FMU

JB Weld is more advanced than a FMU.

Re: Anything stronger than JB weld??
 

ok, anybody think this will hold?: just bought a car for cheap but the driver side window crank has already been stripped from vise grips, ok so i tried to think that i could get this bitch working sweet. i ended up drilling out a hole in the shaft that is used to turn it, then i tapped it then screwed a bolt into the hole while using JB as a locktite, let it dry. who thinks it will give up while rolling the window up? and if it does anybody know know any stronger?

Re: Anything stronger than JB weld??
 

That should hold fine. Just dont over crank it when lowering or raising the window.

Re: Anything stronger than JB weld??
 

i rethreaded to the existing threads.. just to get all of the remaining spark plug threads out. i didn't touch the alluminum head threads.

Re: Anything stronger than JB weld??
 

find an crank that uses a square instead of splines. file to shape. problem solved.