anyone in nebraska up for pizza and beer? price of both inside with pics ;)
i need some helpful hands to put my motor together once its back from the machine shop.. im hopeing to get it all done by next weekend or on the weekend.. if anyone in nebraska has some experience and wants to help, i'll bribe you with free pizza and beer >:D lol
hopefully i wont have to solo it but if i have any problems i'll post up ;D here's the progress so far yesterday when i had 1/3 of the tools required http://img184.imageshack.us/img184/9...ture0089ry.jpg http://img184.imageshack.us/img184/9...ture0096ur.jpg today after spending close to $400 on tools :l still minus a cherry picker, and now minus one nut and plus a serious back ache http://img76.imageshack.us/img76/8164/picture0305jl.jpg http://img76.imageshack.us/img76/1871/picture0329hq.jpg http://img76.imageshack.us/img76/8392/picture0330gy.jpg http://img76.imageshack.us/img76/6853/picture0349ux.jpg |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
dude, you can take apart a whole car with a 200 dollar mechanics set from sears...
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by rawr
dude, you can take apart a whole car with a 200 dollar mechanics set from sears...
i wasnt gonna skimp on the tourqe wrench so that was $75 plus tax, the bolt out was $40 plus tax, the tool set was 200+ plus tax.. it adds up :3 |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Ah, yeah. buying the little ---- adds up fast.
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Today I had to buy a new inner tierod removal tool to finish a job at work, it cost me 113 from snap on
It sucked, i just payed my tool bill down to under 600 bucks and now im over 700 again, fucken snap on |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by Zeniceguycrx
Today I had to buy a new inner tierod removal tool to finish a job at work, it cost me 113 from snap on
It sucked, i just payed my tool bill down to under 600 bucks and now im over 700 again, fucken snap on i was litteraly spending 20 minutes looking for tools around my garage with what i had before i bought my set... so it was a nesissity (fucked that word over) :y |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
well unlike our cars atleast our tools are an investment
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
lol thats true! any car i have is a money pit, at least now i have the tools i need to do 2/3 of the ---- i'll ever run in to
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by rawr
dude, you can take apart a whole car with a 200 dollar mechanics set from sears...
-10, 12, 14, 17mm socket. 3/8" drive -10, 12, 14mm wrenches flat tip and philips screwdriver small flat tip screw driver needle nose and adjustable pliers sharpie marker zip ties electrical tape and thats about it. ohh yeah, and good luck on the rebuild. if i were in nebraska i would be over. |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
buyin tools=worth every penny
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by Zeniceguycrx
Today I had to buy a new inner tierod removal tool to finish a job at work, it cost me 113 from snap on
It sucked, i just payed my tool bill down to under 600 bucks and now im over 700 again, fucken snap on what do they look like cause i need to do my inner tie rods? |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Im in York, pay for my gas and im there :P
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by chris
buyin tools=worth every penny
Originally Posted by Ogubudiah
Im in York, pay for my gas and im there :P
block just got dropped off at the machine shop today |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
damn, york aint TOO far away.....i'm in laramie right now....sounds kinda fun i spose
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Why didn't you just drop the engine and tranny out the bottom, both at the same time? Woulda saved you alot of time and backache. I can seriously have my b16a/turbo out of my 89 hatch in under 1 1/2 hours. Plus have fun getting that input shaft on the trans back into the clutch and bearing with it hangin like that :l
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by slo_crx1
Why didn't you just drop the engine and tranny out the bottom, both at the same time? Woulda saved you alot of time and backache. I can seriously have my b16a/turbo out of my 89 hatch in under 1 1/2 hours. Plus have fun getting that input shaft on the trans back into the clutch and bearing with it hangin like that :l
i'll have no problem getting it to line up, i have it back in place now with a jack i didnt take it out the bottom A: because i dont have the room to B: because i didnt want to take the tranny out C: didnt wanna put the tranny back in D: i like doing stuff the hard way :P mostly just didnt want to mess with the axles and the tranny and ---- when i dont have the stuff to lift that much weight into the car without seriously breaking my back |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
i think i found the problem i've been haveing with my ecu
http://img429.imageshack.us/img429/9...ture0381zp.jpg beautiful aint it? goober before me didnt secure the harness and it got wrapped around the driver side axle |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by slo_crx1
Why didn't you just drop the engine and tranny out the bottom, both at the same time? Woulda saved you alot of time and backache. I can seriously have my b16a/turbo out of my 89 hatch in under 1 1/2 hours. Plus have fun getting that input shaft on the trans back into the clutch and bearing with it hangin like that :l
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
rofl, nice
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
just figured out what those wires goto... directly to me injectors and ecu!
one wire on all the injectors is the same color so i have no ------- clue where they should go... :l anyone know how to hook em up to the plug for a Z6 swap into an EF hatch? if so drop me a line... for now i'll fix what i can and search for info on the rest correct info to fix em will earn you $10 via paypal after the car runs :y |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by Anubis_4_99
and now minus one nut and plus a serious back ache
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
from lifting the motor... meaning it was a bitch....
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
hey buddy
you know im in lincoln, i work at a hardware store and we rent ---- out. if its worth the drive you can come get a cherry picker from me for no cost as long as its from friday 4pm- sunday 6pm. i would need ur credit card though. because when ---- is free somtime u dont get it back... also how far away is it, i could help next sunday... |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
its worth it to me, i cant find a place within 100 miles of me that will rent one.. kinda forgot about you over there, lol
i need to get some block posting supplys monday, and something else before the machine shop will do any work on my block so it may not be ready quite by then i dont have a credit card but my mom could give ya hers, lol.. credit cards get me in trouble ;D i had a 7K bill at circuit city once before because of them mapquest says lincoln is 4 hours from my house but i made it to omaha in 2 1/2 and lincoln is only 30 miles or so away from where i go in omaha.. how long do you guys rent them out? i'd need it for like 2-3 days to make sure i get everything in right |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
give me a good heads up on exact dates. max 3 days. and that collateral lol ! itll be under the counter so gotta pull it off smooth.. its brand new 2 others have rented it in the last 6 months, once was me and other was my budys lol
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by Anubis_4_99
its worth it to me, i cant find a place within 100 miles of me that will rent one.. kinda forgot about you over there, lol
i need to get some block posting supplys monday, and something else before the machine shop will do any work on my block so it may not be ready quite by then i dont have a credit card but my mom could give ya hers, lol.. credit cards get me in trouble ;D i had a 7K bill at circuit city once before because of them mapquest says lincoln is 4 hours from my house but i made it to omaha in 2 1/2 and lincoln is only 30 miles or so away from where i go in omaha.. how long do you guys rent them out? i'd need it for like 2-3 days to make sure i get everything in right |
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by mycrx
if you cant get a cherry picker bro haha ora mexican, then if you can secure a cable with a come-a-long above your ---- then basically just winch that pig out..
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
you took that motor out funny .. lol
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
Originally Posted by ososlohatch
you took that motor out funny .. lol
|
Re: anyone in nebraska up for pizza and beer? price of both inside with pics ;)
i dropped my engine and tranny out the bottom at the same time...disconneted harness/fuels lines..jacked the car like 5 feet in the air , put some wood on the jack until i culd jack the motor up then i losened the mounts then just lowered it and me and a buddy carried it into the garage took about and hour with 2 people..i wish ihad a cherry picker tho
|
All times are GMT -5. The time now is 10:03 PM. |
© 2024 MH Sub I, LLC dba Internet Brands