Anyone know where to buy a ball flange coupler?
 

I built a downpipe for the Merk, now I'm trying to figure out how to couple it into the exhaust.. I've used header collector style three-bolt flanges in the past, but those are a PITA because my fluxcore bead tends to be a little tall and it's already a tight fit to get the bolts in around the 3" pipe. Sooo... wondering if any of you gents know where to get a complete ball coupler system (as in both sides) to weld into my exhaust. I've seen 'em at Summit, but they tend to reduce in diameter from one side to another (i.e. 3" to 2.5") and I just want a straight 3" pipe from turbo to tail. :)

Thanks,
Colin

Re: Anyone know where to buy a ball flange coupler?
 

S'pose I should also note: I've already tried the local exhaust places - they all try to sell me the same three-bolt header collector flanges. ---- that. :1

Colin

Re: Anyone know where to buy a ball flange coupler?
 

v-bands own you ;)

Re: Anyone know where to buy a ball flange coupler?
 

could you use a piece of flex pipe, i guess i dont really understand the problem

Re: Anyone know where to buy a ball flange coupler?
 

summitracing

Re: Anyone know where to buy a ball flange coupler?
 

I should clarify: the system needs to have a slight amount of adjustment in it (up/down, side/side) - if this weren't the case, I'd use a v-band... and I do plan to put a piece of braided flexpipe in the system, but I also need a disconnect point between the downpipe and the rest of the exhaust. Maybe v-band with a flexjoint behind it is the best solution. :y

Colin

Re: Anyone know where to buy a ball flange coupler?
 

I was reading along and thinking "V-band + flexpipe" and then I got to the part when you suggested it as an option and was like "Dizzam."