Anyone know anything about bypassing a viper alarm?
 

My 91' supra turbo, has a viper alarm module underneath along w/ the factory theft control module, and the turbo timer is wired into the ignition as well.. i can get the starter to turn over 1/10 tries.. but i have to ---- w/ the door locks, and some special button underneath the dash.. i just want to bypass all of this cluster ---- and have standard doors, and be able to pu thte goddamn key in and go.

Re: Anyone know anything about bypassing a viper alarm?
 

Find the box, rip out all wires and connect anything that was factory back to where it should be. It won't be hard to figure out once you get the alarm out of the way. I've ripped out several alarms. Usually they only interupt the starter circuit and it's almost always spliced right under the dash for any thief to see. ::)
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re: Anyone know anything about bypassing a viper alarm?
 

Same advice I would give. Most connections are just spliced in so you can just cut them except for the starter wire so you have to make sure you reconnect it.

Rip that bitch out.

Re: Anyone know anything about bypassing a viper alarm?
 

on the viper alarm box, it tells what color wires are for what.. and it says nothing about a starter wire. indicates 12v, and ignition though

Re: Anyone know anything about bypassing a viper alarm?
 

Can you list all of the wires? I guess I have a thing for wiring because I don't even look at what I'm ripping out anymore. I just rip it all out and go from there. :-\
This pile of bullshit came out of my black hatch. :3
Attachment 19037
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re: Anyone know anything about bypassing a viper alarm?
 

Ya I just find the things running to the alarm cut and try to elimnate any extra wiring. If any wiring is left over eletrical tape to the rescue

Re: Anyone know anything about bypassing a viper alarm?
 

I'm afraid i'm going to cut something that I shouldn't. the harness is taped up really well, and they have that liquid electrical tape ---- on there too. and zip tied like a mother. here's some pics of teh cluster i have.

Attachment 19033
Attachment 19034
Attachment 19035
Attachment 19036

pics aint worth a crap.

it also has a gray, and gray/black going to a special "button" underneath the steering wheel.. the guy I bought the car off of, said sometimes if the car wont start you have to push the "button" while u turn the key and it'll start.. but i coudln't ever get the fucker to work.. it would just start every once in a while i guess.. i'd have to ---- w/ the door locks it seems like.

Re: Anyone know anything about bypassing a viper alarm?
 

Probably a "valet" button. :-\ I would rip all that ---- out and start from scratch. It will be so much clearer once you get all that bullshit out of there.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

Re: Anyone know anything about bypassing a viper alarm?
 

not knowledgable enough man.. i just need to find the starter wire and bypass all of that... i think....

Re: Anyone know anything about bypassing a viper alarm?
 

i dont really understand relays and ----.. there's a relay box right before the viper alarm box.