any turbo d17's out there?
I just bought a 02 civic lx sport and it has the 1.7 sohc non-v-tec mill in it and ---- is it gay. My wifes old car was a teggy but we needed a 4dr. I do like the car for family ---- but its slow as ---- on the hills even if you run the ---- out of it. I really need to swap it out or maybe 5 psi, I dont need a race car but dam :-[ Any one had any luck with a hmt kit?
|
Re: any turbo d17's out there?
C'mon now Chad....not every car can be a project car ;) I actually just read an article in one of the tuner rags that talked about a turbo d17, just cannot remember which one it was :-\
|
Re: any turbo d17's out there?
I dont want it to be a project but goddam I have a image to uphold 8)
|
Re: any turbo d17's out there?
|
Re: any turbo d17's out there?
K series time :o
|
Re: any turbo d17's out there?
If you swap for a K highroller, mail me, ill pick up that d17 from ya 8)
|
Re: any turbo d17's out there?
Originally Posted by SinisterCRX
If you swap for a K highroller, mail me, ill pick up that d17 from ya 8)
Sorry, back to highroller's wimpy d17 thread ;) |
Re: any turbo d17's out there?
what do the little hatch backs come with for a mill? k20? I think there the 01+ si but we call them sir's
|
Re: any turbo d17's out there?
those are k20a3=wack. but better than your current setup. i think the guy with the turbo d17's name on here is like speedracer32 or something like that ???
|
Re: any turbo d17's out there?
I know I can get a snail on it and intercooler like ---- all buut the returnless fuel system and 4 coil packs scream tuning nightmare. I would love 140 hp from this bitch.
|
Re: any turbo d17's out there?
zc4me, when that time rolls around tell me. Might do a swap for my girlfriend.
highroller, is it auto? If so I heard the "dont hold past 4 psi"... |
Re: any turbo d17's out there?
Originally Posted by SinisterCRX
highroller, is it auto? If so I heard the "dont hold past 4 psi"...
|
Re: any turbo d17's out there?
whats wrong with the old ladys d17?
|
Re: any turbo d17's out there?
Well, I assumed it was yours wife car. Sorry :P
|
Re: any turbo d17's out there?
its not Vtack :P
I'm thinking maybe down the road, the way she drives.. heh |
Re: any turbo d17's out there?
No no I ment your old ladys d17, this car is my wifes. I would never rock a 100hp 4dr but I dont think shes loving it either. She wanted a tsx but we decided on this till I get my eg all done and my superduty lifted. This is suposed to last us 2-3 years but It needs more jam
|
Re: any turbo d17's out there?
Just use a Greedy emanage and RSX type S injectors which are 330cc.Other than that some good ol flat rate fluxcore and JB action.The plastic manifold looks a little sketch but Im sure it will hold moderate pressure from a low boost small turbo setup.
|
Re: any turbo d17's out there?
I was kinda reading up on the emanage, whats the low down on that beast?
|
Re: any turbo d17's out there?
Originally Posted by highroller54
No no I ment your old ladys d17, this car is my wifes. I would never rock a 100hp 4dr but I dont think shes loving it either. She wanted a tsx but we decided on this till I get my eg all done and my superduty lifted. This is suposed to last us 2-3 years but It needs more jam
|
Re: any turbo d17's out there?
The older one is a fancy SAFC but it does have a ignition harness available so you get some control and i guess you can dial a little timing out under boost.The new Emanage Ultimate actaully looks pretty solid but it is pricey.I see the Emanage blue's for sale all over the place for cheap.I have a local guy asking me about turboing his 03 Civic DX or whatever and i found a write up on wiring the emanage up as it seems like the best and easiest solution for a relatively low budget boost kit.If you surf the forum in that link there is alot of info about boosting one of those.I really doesnt seem very hard.
http://www.7thgencivic.com/forums/sh...d.php?t=217534 |
Re: any turbo d17's out there?
Well I guess its time for a ---- load of research/ reading again, I wonder if you can just use a safc, I dont think timing would be a problem at 5 psi :-\
|
Re: any turbo d17's out there?
vafc2 or safc2 work
|
Re: any turbo d17's out there?
id go with vafc2 and those type s 330's
|
All times are GMT -5. The time now is 08:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands