HomemadeTurbo - DIY Turbo Forum

Page 4 of 5

Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- General Discussion (https://www.homemadeturbo.com/general-discussion-6/)

- - AbaZ, I did it... (https://www.homemadeturbo.com/general-discussion-6/abaz-i-did-32628/)

djfob

01-04-2005 01:44 AM

Re:AbaZ, I did it...

haha this thread has really took a turn...... Hey Stan I'm sure if you talked to him longer he would have thrown in a valve cover :)

Spenser

01-04-2005 01:45 AM

Re:AbaZ, I did it...

I dunno, he tried to sell me a cracked Zc valve cover for 40 bucks >:(

AgentMurdoc

01-04-2005 01:46 AM

Re:AbaZ, I did it...

http://users.eastlink.ca/~sly1/IM002294.JPG
did you get that air freshener for free?

Stan	01-04-2005 08:16 AM

Re:AbaZ, I did it...

Nope, air freshener was a christmas gift. :D
I'll probably get my dowels from tuner toys.. as long as that shipping includes shipping to Canada.

Mary: I met Spenser when I was in Calgary, I would have kicked him in the nuts for you if it ment being closer to you. ;)

Stan

TunerToys

01-04-2005 08:25 AM

Re:AbaZ, I did it...

Sure, I'll ship to Canada for that amount, Global Priority to Canada vs. US, for under a pound, is only like .15 more....

Thanks for supporting us, even tho we were not the least expensive....

Craig

HMT-Admin

01-04-2005 12:23 PM

Re:AbaZ, I did it...

Quote:

Originally Posted by Kyle

Quote:

Originally Posted by Dr.Boost

---- the dowels. Didn't you see Jeffs write-up on that? Go buy a drill bit. ;)

as much as I'm ghetto, ghetto isn't the best way to go. I got my dowels for $25 from turbohf. that $25 is worth having the head and block seal nicely.

Ghetto? what is so ghetto about drilling 2 holes in the head (actually enlarging to holes) to the exact diameter of standard head dowls?

It's not rocket science, nor is it even slightly challenging. I beleive my write up was pretty easily explained on what to do.. go buy drill bit, drill, and your done. Or you can order some dowls for 25 bucks or whatever and wait. I've done about 4 ls/vtec heads for people and yes the "head and block seal nicely" Exactly why turbohf sold his stupid dowls.

::)

projekteg

01-04-2005 12:39 PM

Re:AbaZ, I did it...

Quote:

Originally Posted by AbaZ

go buy drill bit, drill, and your done. Or you can order some dowls for 25 bucks or whatever and wait. I've done about 4 ls/vtec heads for people and yes the "head and block seal nicely" Exactly why turbohf sold his stupid dowls.

support your local hard ware store, buy a drill bit, or support you local dowel pin distributor and buy dowel pins, it's up to you, but a good drill bit is going to cost just as much.

Honda16hb

01-04-2005 05:10 PM

Re:AbaZ, I did it...

Quote:

Originally Posted by AbaZ

I've seen a standard sized drill bit was used, last time I checked honda engineers used the metric system. also I've seen it done using a hand drill, I've used a hand dril before and it wasn't very straight drilling, I'd like my dowel holes nice and straight. with the correct tools and equipment it's not ghetto, but ghetto can be achieved, and it won't be achieved by me on this one.

Dr.Boost

01-04-2005 06:22 PM

Re:AbaZ, I did it...

You'll use a coke can as charge piping, make your own OBD conversion harness(that was fucked up), chip your own ECU(that was probbaly fucked up too), but you won't drill the holes for the dowel? ??? That's like ------- an HIV patient without a condom after turning her down for a blowjob because she has aids. ???
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote

crx304

01-04-2005 06:42 PM

Re:AbaZ, I did it...

Quote:

Originally Posted by MakAttack

don't act like i'm retarded, bitch. i don't see anyone else pitching any answers. so stfu.

yea!!!! lmao

ohh, BTW have that head surfaced!

All times are GMT -5. The time now is 03:54 AM.

Page 4 of 5

Show 40 post(s) from this thread on one page