98 2DR Integra Trunk Problem PLEASE HELP!!!
My car doesnt have a manual release for the trunk, i hear from the actual lock but no response from the actuator and the trunk doesnt open:mad:.
Please help me with this annoying problem. Let me know what you might think it is |
Originally Posted by SoleKing
(Post 1281411)
My car doesnt have a manual release for the trunk, i hear from the actual lock but no response from the actuator and the trunk doesnt open:mad:.
Please help me with this annoying problem. Let me know what you might think it is i think the problem is you have a Honduh/AcurUH? get a toyota they are more reliable :D |
haha......no! but seriously can anyone help?
|
you are screwed, thats one rare thing to have happened to you the only thing you can do now is take the lock apart from inside the trunk..
|
Originally Posted by Bulletman
(Post 1281504)
you are screwed, thats one rare thing to have happened to you the only thing you can do now is take the lock apart from inside the trunk..
|
try spraying it with greese and then keep trying to unlock it, cuz if u hear it it might just be stuck
|
Originally Posted by Bulletman
(Post 1281565)
try spraying it with greese and then keep trying to unlock it, cuz if u hear it it might just be stuck
|
if u cant figure that out on your own go to a mechanic.
there is a spot where you hold your hand when you pull the hatch up after its opened, that spot.. or get inside the trunk from inside your car and spray it.... |
Originally Posted by Bulletman
(Post 1281644)
get inside the trunk from inside your car and spray it....
|
drill out the old lock assembly and replace with new. If I remember right, you can have the tumblers set to fit your key before you put it back in
|
Originally Posted by hatrack48
(Post 1281699)
drill out the old lock assembly and replace with new. If I remember right, you can have the tumblers set to fit your key before you put it back in
|
wow! why dont you just sell the car, becuase if you cant figure this out i dont want to see you even try to change your own oil. i mean seriously though this is simple problem that take a 12yr olds problem solving skills. that other guy is basically walking you through it and you still cant understand
|
ok u ------ dick head how would i get to the lock assembly when its closed and i cant get it open which is the ------ problem
|
happens some times, u gotta make sure the cables from the release are not rusted. take off the release and yank on the cable with pliers. then grease up the lock if u get it open
|
All times are GMT -5. The time now is 05:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands