97 GSR build, from the ground up (updated 1-14-06) 56k = very bad idea
12-31-2005, 08:50 PM
#22
3.0 BAR
Join Date: Oct 2005
Posts: 3,450
Re: 97 GSR build, from the ground up
Keep at it, going to be fun...
BTW, "Next, I went to the boneyand scrapped some 91 gsr brakes. Nobody was 100% this swap would work, but it seems it does." There was no 91 GSR. Those are 92's.
BTW, "Next, I went to the boneyand scrapped some 91 gsr brakes. Nobody was 100% this swap would work, but it seems it does." There was no 91 GSR. Those are 92's.
01-02-2006, 06:23 PM
#23
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,798
Re: 97 GSR build, from the ground up
updated: installed wiper motor/linkage, test fitted some of the stuff behind the dash, removed the fuel cell and started preping for the fuel tank.
now I have one massive hole in my car, i'm have decided on what I'm going to do. I might bust out the rivet gun and some sheet metal then put some type of sealeat around it. I guess I could welding since the gas tank has been removed. What are some ideas yall have? Also what is the type of that sealent that is very thick and doesnt seem to fully dry. It was around the fuel cell it probably would help me seal up the fuel pump hole since the bashed it in. Also anyone have any good ideas on filling in the rivet holes? my just put some sealent, i'm not going to spot weld 200+ rivet holes like i should. I'm open to ideas so let me know.
Thanks
Nick
now I have one massive hole in my car, i'm have decided on what I'm going to do. I might bust out the rivet gun and some sheet metal then put some type of sealeat around it. I guess I could welding since the gas tank has been removed. What are some ideas yall have? Also what is the type of that sealent that is very thick and doesnt seem to fully dry. It was around the fuel cell it probably would help me seal up the fuel pump hole since the bashed it in. Also anyone have any good ideas on filling in the rivet holes? my just put some sealent, i'm not going to spot weld 200+ rivet holes like i should. I'm open to ideas so let me know.
Thanks
Nick
01-02-2006, 07:51 PM
#27
1.5 BAR
Join Date: Jun 2004
Posts: 755
Re: 97 GSR build, from the ground up
My friend Tom has some integra parts I think. He is on SNI. I forget his screen name. I went to school with him, he is cool. You should hit him up. I think he might have a 4 door.
I think his name on SNI is hybridracer504 or something like that.
I think his name on SNI is hybridracer504 or something like that.
01-02-2006, 08:10 PM
#29
!! UNCONFIRMED EMAIL !!
Join Date: Nov 2005
Posts: 1,876
Re: 97 GSR build, from the ground up
Seamsealer is what most boyshops use because its paintable, it can be purchased at your local Auto paint and body supply shop, I just picked up a tube that fits into my caulk gun, but the brush in cap would work fine.
01-02-2006, 09:04 PM
#30
3.0 BAR
Thread Starter
Join Date: Jan 2003
Posts: 1,798
Re: 97 GSR build, from the ground up
Originally Posted by Dibble
My friend Tom has some integra parts I think. He is on SNI. I forget his screen name. I went to school with him, he is cool. You should hit him up. I think he might have a 4 door.
I think his name on SNI is hybridracer504 or something like that.
I think his name on SNI is hybridracer504 or something like that.
I looked at all the autoshops in ruston for the sealer,I'll check the paint shops tomorrow.
