'95 kawi ninja turbo ripper vid
09-30-2007, 11:29 PM
#12
3.0 BAR
Thread Starter
Join Date: Jun 2006
Posts: 2,651
Re: '95 kawi ninja turbo ripper vid
Originally Posted by xternal
not fast but sounds **** 
09-30-2007, 11:31 PM
#13
0.0 BAR
Join Date: Dec 2005
Posts: 0
Re: '95 kawi ninja turbo ripper vid
Originally Posted by Tough-guy
You need to watch the video again, pulls up in fouth, rides 5+6th.
The meth must be getting to you.
The meth must be getting to you.
watch the video when he lands that "sick 5tha nd 6th wheelie" yet the speedo barely breaks 100MPH when the wheel touches back. your retarded if you think any differently. unless he has a 78 tooth rear and a 10 tooth front or something like that, hes not wheelieing in 6th gear at <100
09-30-2007, 11:54 PM
#15
0.0 BAR
Join Date: Sep 2007
Posts: 14
Re: '95 kawi ninja turbo ripper vid
Originally Posted by SinisterCRX
Throw some sarcasm in there, and the fact that the fuel tank is on empty, and you get the end solution that you need to think before you reply.
Bike looks fun.
Bike looks fun.
That's the temperature gauge which isn't even connected.
Originally Posted by CoreyR
speed of light? lol the bike is slow. wow it does a wheelie when it hits boost at 10K. that doesnt make it fast.
In the tank cam clip, I was messing around with my cam timing so it did spool late.
It has full boost by 6000.
Also, I don't care about setting strip times. I just torboed it for the hell of it because it was just a bike I had laying around.
Before, it wouldnt clutch up sitting down in 2nd. Now it power wheelies in 4th at 100. And right now my clutch is the limit because it breaks lose above 10psi
You even have to bounce the r1 to come up in 2nd.
Out of my 6 bikes, I take this one out 95% of the time.
By the way, last sitdown wheelie was pulled up in 3rd, sat down in 6th. Count the shifts. The standup wheelie was 3rd.
. I really need to learn how to shift while doing a wheelie :1
10-01-2007, 12:01 AM
#18
0.0 BAR
Join Date: Sep 2007
Posts: 14
Re: '95 kawi ninja turbo ripper vid
Originally Posted by CoreyR
dude at no point in that video did he wheelie 5th or 6th. your ------- delusional.
watch the video when he lands that "sick 5tha nd 6th wheelie" yet the speedo barely breaks 100MPH when the wheel touches back. your retarded if you think any differently. unless he has a 78 tooth rear and a 10 tooth front or something like that, hes not wheelieing in 6th gear at <100
watch the video when he lands that "sick 5tha nd 6th wheelie" yet the speedo barely breaks 100MPH when the wheel touches back. your retarded if you think any differently. unless he has a 78 tooth rear and a 10 tooth front or something like that, hes not wheelieing in 6th gear at <100
Another thing...I'm by no means a stunter, but I can twelve and highchair. Wheeling a turbo bike is a whole different matter cause of the lag and then the sudden power. Took me a while just to be able ride those wheelies.
If you never rode a turbo bike, let alone a bike, it's unexplainable.
10-01-2007, 12:02 AM
#19
0.0 BAR
Join Date: Dec 2002
Posts: 0
Re: '95 kawi ninja turbo ripper vid
yea definatly a sweet bike.
i doubt its faster than a r1. like coreyr said, it looks as fast as a liter bike from the mid 90s. but since you have an r1 and that... i guess its as fast.............
as for the wheelies, looked like you yanked on the bars while i was watching
i doubt its faster than a r1. like coreyr said, it looks as fast as a liter bike from the mid 90s. but since you have an r1 and that... i guess its as fast.............
as for the wheelies, looked like you yanked on the bars while i was watching
10-01-2007, 12:02 AM
#20
0.0 BAR
Join Date: Dec 2005
Posts: 0
Re: '95 kawi ninja turbo ripper vid
Originally Posted by Airbeast
How can you tell my tank is empty? By looking at the gauge?
That's the temperature gauge which isn't even connected.
Well...it's certainly no turbo Busa...but for what it's worth, with half the displacement, it kills my 929 and my R1.
In the tank cam clip, I was messing around with my cam timing so it did spool late.
It has full boost by 6000.
Also, I don't care about setting strip times. I just torboed it for the hell of it because it was just a bike I had laying around.
Before, it wouldnt clutch up sitting down in 2nd. Now it power wheelies in 4th at 100. And right now my clutch is the limit because it breaks lose above 10psi
You even have to bounce the r1 to come up in 2nd.
Out of my 6 bikes, I take this one out 95% of the time.
By the way, last sitdown wheelie was pulled up in 3rd, sat down in 6th. Count the shifts. The standup wheelie was 3rd.
That's the temperature gauge which isn't even connected.
Well...it's certainly no turbo Busa...but for what it's worth, with half the displacement, it kills my 929 and my R1.
In the tank cam clip, I was messing around with my cam timing so it did spool late.
It has full boost by 6000.
Also, I don't care about setting strip times. I just torboed it for the hell of it because it was just a bike I had laying around.
Before, it wouldnt clutch up sitting down in 2nd. Now it power wheelies in 4th at 100. And right now my clutch is the limit because it breaks lose above 10psi
You even have to bounce the r1 to come up in 2nd.
Out of my 6 bikes, I take this one out 95% of the time.
By the way, last sitdown wheelie was pulled up in 3rd, sat down in 6th. Count the shifts. The standup wheelie was 3rd.
