7psi is pretty bad, 10 ought to be fun... 56K maybe
So I got thru all my stupid issues, car runs very well now. Definitely 13's capable on 10psi, 7psi right now is fairly quick, way better than that old d15b+greddy setup i started with.
Picked up a 14b with no play, solved the electrical issues, and tested her out today. the 14b gate holds rock at 7psi, when i get to tuning ill go for 10psi. For now I still can't get my laptop working, only thing I havent replaced is the RAM, so I guess thats next. For whatever reason the internal gate flapper isnt completely closed out of boost, I shimmed one of the mount bolts to try to pull it back a bit, and its quieter, but still open, gonna try to shim the other one and see if it helps. is this common for them to be part open like that? I would think it'd cause some lag, and I tried two different actuators both from 14b's...same result. with the o2 sensor not grounding out anymore, it doesnt pop and ---- anymore either, so thats good. also no cel's or flickering, all is well. Next is figure out the laptop issue and get that wideband on there. no ripping til its on wideband and i know its not lean or anything bad like that. anyone in the portland area wanna bring out the laptop with a serial port for me? :) anyways...here's the good stuff. Hope its not a skittles car like the last one there Stevemode. :-* d16z6, fresh bottom end, 210psi comp across all 4, stock head 14b + HF 2.5" charge piping and downpipe all HMT'ed JRC 8" FMIC 450cc DSM's p28/Crome TunerToys Couplers Stealthmode Oil Lines Spearco Boost Gauge Blitz DD BOV Zietronix WB Pics Here was my problem, see the lower o2 real close to the radiator, on decel it would rub against it and ground out http://www.centerlinemotorsports.com...s/install4.jpg JRC 8" http://www.centerlinemotorsports.com...mages/jrc2.jpg Spearco Boost Gauge, bought it cause its blacked faced, hate that white face Autometer I have http://www.centerlinemotorsports.com...ges/gauge1.jpg Couple whole shots, you can see the piping and Blitz DD. Paint color is Dupli-Color Gunmetal wheel paint, re-used from leftovers when I painted the wheels. http://www.centerlinemotorsports.com...s/install1.jpg http://www.centerlinemotorsports.com.../install11.jpg Turbo, mani, DP shots. You can see the trouble I had with the oil lines. The first turbo had a stripped hole (came that way) and so it ate the threads on the fitting, I had to get another fitting that went in deeper to extend it, then sealed it up with some HiTemp Epoxy Putty called PC-Farenheit. Had to do it on the new turbo too cause the first round I chewed up Stevemodes oil fitting. http://www.centerlinemotorsports.com...s/install3.jpg http://www.centerlinemotorsports.com...s/install5.jpg Now for my emmy award style "I'd like to thank" speech Big thanks to HMT for learning me good on turberyos. I'd like to thank Big Poppa Murdoc for the resistor box, and Tunertoys for some good steel and nice couplers. Genxperformance for a nice BOV, and Tyrus for the fatty intercooler. Thanks to Dustin for the mint 450's, Crome for having sex with my p28, DJ for the new perfect condition 14b...(This is where you need that "wrap it up box" from the Chappelle show "Yo wrap that ---- up B")...STevemode for the oily lines, 5thgencivic for the MBC....and again to HMT for being there so I didn't buy another gay kit. If I could afford it I'd donate 1000 dollars a year instead of the $30 I tossed in. |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
looks good
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by SmokeShank
looks good
j/k glad to hear you finally got everything figured out ;) |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Quit being lazy and go get some vids of burnout's, and I dont want any ----- burnouts I want to see tires pop ;)
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
oh just out of curiousity, what was so bad with you old d15b/gretty setup besides the price amd managment?
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by jhmcrx
oh just out of curiousity, what was so bad with you old d15b/gretty setup besides the price amd managment?
greddy kit was pretty tiny tho. got my laptop working! 13:1 AFR's pretty much all thru boost...time for tuning. |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
oh, was it a d15b or d15b2?
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by jhmcrx
oh, was it a d15b or d15b2?
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by FooK
Originally Posted by jhmcrx
oh, was it a d15b or d15b2?
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Looks good Fook. Although, I second Steve's suggestion. :)
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
bout time nigrolog
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
take that ho to the track, i wanna see what she do
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by FooK
I'd like to thank Big Poppa Murdoc
Looks good mang. We definitley need some vids on that ;D |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Not sure if you solved your boost leaking issue at the wastegate but i just bought a 14b today and the wastegate flapper was not at the proper location. It's a common problem for the 14b's, like even if it's closed it would still not cover the hole properly, you have to hammer it back in place from the outside where the actuator hooks up to the flapper...I can take pics if you think this is your issue as well.
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
please do take pics.
you hammer on the flapper itself? or is it the bracket that holds the actuator that bends in? mine is mostly closed, just sits open slightly |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by leed
Looks good Fook. Although, I second Steve's suggestion. :)
its so rainy out anyways, i was spinning well into 3rd gear and you could hear my tranny saying "IIIII'LLL kick you in the NUTS"
Originally Posted by scottsi
take that ho to the track, i wanna see what she do
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
and 210 compression is high for a z6, looks like you got carbon buildup
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Gj on the setup.
Didint think i would be right saying it could be the o2 sensor grounding out! just like what happend to me on my old setup. |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
damn, looks real good fook face. hell, the only thing i would even upgrade down the road would be the mani, everything else is P.I.M.P. O0
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Nice lookin setup man. Congrats! 8)
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by Random Hero
Gj on the setup.
Didint think i would be right saying it could be the o2 sensor grounding out! just like what happend to me on my old setup. |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
looks good FOOKer. looks like you need a lip haha. how come the IC hangs so damn low? we need some action footage.
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
10 lbs on a 14b cant be all that crazy son, get yourself a real turno...
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Looks great man!
We should race some time, I would like to see how my car compares... just for shits and giggles... I might go to PIR on Friday if the weather is nice... |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
'd-series ten pounds, will turn ya out!
no tire hop, that's where it counts.... i got the urethane motor mounts..' :D |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Very nice.
I have basically the same setup as your Fook; except I cheaped out on the BOV. Just wondering around which RPM do you get full boost? |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
very nice setup fook... is it runnin good? Hows the tuning coming?
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by 88dx
Quit being lazy and go get some vids of burnout's, and I dont want any ----- burnouts I want to see tires pop ;)
yea come on man!!!! i'm with this guy |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by FooK
Originally Posted by Random Hero
Gj on the setup.
Didint think i would be right saying it could be the o2 sensor grounding out! just like what happend to me on my old setup. yes. |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by Random Hero
Originally Posted by FooK
Originally Posted by Random Hero
Gj on the setup.
Didint think i would be right saying it could be the o2 sensor grounding out! just like what happend to me on my old setup. yes. freshly cleaned head and the pistons were spotless and in perfect condition when it was assembled...so no. |
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
do you have any pics of the windshield fluid holder and the piping?
|
Re: 7psi is pretty bad, 10 ought to be fun... 56K maybe
Originally Posted by raiden571
do you have any pics of the windshield fluid holder and the piping?
Originally Posted by ej1 wilcox
Looks great man!
We should race some time, I would like to see how my car compares... just for shits and giggles... I might go to PIR on Friday if the weather is nice...
Originally Posted by CSaddict
10 lbs on a 14b cant be all that crazy son, get yourself a real turno...
Originally Posted by BoosTedZSix
looks good FOOKer. looks like you need a lip haha. how come the IC hangs so damn low? we need some action footage.
Originally Posted by projekteg
damn, looks real good fook face. hell, the only thing i would even upgrade down the road would be the mani, everything else is P.I.M.P. O0
|
All times are GMT -5. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands