zc psi
 

i know some of you here have a dual cam zc but most of yours are probably built but as of now mine is bone stock and i have a projected boost range of 8-10 lbs and i am wondering if you guys have or had experiance with your stock zc's on boost.just wondering how much it will hold before it grenades!!

(your friends) posts are welcome here just want input.

Re: zc psi
 

Ran mine for 2 year stock. 8psi then up to 11psi. When I pulled it apart to build it, no visable signs of abuse or extrame wear, and I beat the living ---- out of it!

Re: zc psi
 

thats great i want to run 10lbs and now that i know it can handle it and still be reliable.also who tuned it. were you running just a base or a full tune.

Re: zc psi
 

I tuned it. WBo2 Street tuned.
11.9-12.3AFR across the boost maps, 14.5-15AFR at idle and cruising, Open loop, no Stock o2 sensor.

Re: zc psi
 

was it tuned with TE and if so do you still have the maps for it

Re: zc psi
 

Ya it was, I could dig them up, but I never suggest running someone elses tuned map thinking it perfect for them.

Re: zc psi
 

know it wont be a perfect tune for me but i just had xeno burn me a chip from another guys maos he had a just looking for other maps that are close to my set-up so if one doenst run that well maybe i could try another until i get the whole grasp and get all the parts to tune myself

Re: zc psi
 

also just had xeno put datalog in my ---- so even though it is somebody elses map i could run the auto tune function. right?

Re: zc psi
 

Autotune is not entirely trustworthy.

I'll dig for my maps, they'll be on my laptop at home.

Re: zc psi
 

what do you mean by not entirely trustworthy(problem within the software or problem with the map multipliers and such)

Re: zc psi
 

pretty much the same, but only 1 year and i hit up to 12psi daily, when i did the re-build(for more power) it looked good...and the whole time i boosted i ran on xenocrons base map and no intercooler

Re: zc psi
 

I've been running an uberdata basemap from xenocron on a ls with 10psi for almost a year and absolutly no problems. And yes the thing gets beaten hard and put away wet.

Re: zc psi
 

hey boostin around 10psi... what are you guys runnin for fuel??? i wanna run 10psi

Re: zc psi
 

what do you mean running for fuel? if you mean tune my set-up is with turbo edit and i think jk's runs the same.

Re: zc psi
 

This is good info for me too, my set up is almost done......standby xeno

Re: zc psi
 

i run with 91 0ctane (the highest at the pump in cali :-[)

Re: zc psi
 

move

Re: zc psi
 

CAn't find higher than 91 in Washington... :(

Re: zc psi
 

we have 92 in some spots in ohio but mostly 93 :)

Re: zc psi
 

Always run 91oct. I can get 94, but why?
#1 it's expensive
#2 not needed
#3 it's ethanol, my 91oct is straight gas, no corn and additives.

Re: zc psi
 

you guys runnin aftermarket fuel pump or anything??

Re: zc psi
 

running stock pump on mine

JK did you ever find your old maps for me

Re: zc psi
 

you runnin a fmu or fuel regulator??

Re: zc psi
 

i run turbo edit

Re: zc psi
 

Ya, Sorry I did. There on my Laptop, I'll upload them tonight. That's the problem when you re-format the computer and made 5 Backup CDs before you did!

Re: zc psi
 

alright thanks

Re: zc psi
 

hey jk motorsports do u think i can see a copy of your turbo edit burn that u were running on your car cause i have a dual cam zc and running 9 psi with 450cc and just want to see how good my burn is and i know there all gonna be different...and y when i get my chip burned my rev limit is set at 6500 even tho i set it for 7000..