HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   z6 turbo size? (https://www.homemadeturbo.com/forced-induction-7/z6-turbo-size-34975/)

delSol94 02-12-2005 03:16 PM

z6 turbo size?
 
sory if this gets annoying but i just bought a z6 w/ 22k and im lookin to boost it....i wanna run about 7-9 psi but i dont know what the best turbo would be? any help would be great.

s2kdave 02-12-2005 04:00 PM

Re:z6 turbo size?
 
T88 ;)

90accordIHI 02-12-2005 05:08 PM

Re:z6 turbo size?
 
t3 super 60

con 02-12-2005 05:08 PM

Re:z6 turbo size?
 

Originally Posted by 90boostdaccord
t3 super 60

;)

95civic 02-12-2005 05:27 PM

Re:z6 turbo size?
 
The 14b is a good turbo for stock d's and its cheap ;)

shmaptoe 02-12-2005 09:06 PM

Re:z6 turbo size?
 
t3 60 trim or super 60.

djfob 02-13-2005 12:25 AM

Re:z6 turbo size?
 
Depends on budget and spool time you're looking for. I'd go no smaller than a 48/42 T3 though.

con 02-13-2005 10:14 AM

Re:z6 turbo size?
 

Originally Posted by 95civic
The 14b is a good turbo for stock d's and its cheap ;)

to small, spools to fast, hard to drive in traffic and runs out in the top end.

i3lazedx 02-16-2005 09:51 AM

Re:z6 turbo size?
 
the 14b on a d wont die out a t25 will..

bumblezc 02-16-2005 11:41 AM

Re:z6 turbo size?
 
14b holds up well on my DOHC ZC, why not on a Z6?

95civic 02-16-2005 11:59 PM

Re:z6 turbo size?
 
man i would go with the 14b and it dosent die out that bad

45psi 02-17-2005 03:38 PM

Re:z6 turbo size?
 
what about a t3/t4??

Tunerboy18 02-17-2005 03:47 PM

Re:z6 turbo size?
 
it all depends on what you like if you like laggy turbos get big T3 like a super 60 or somthing that size if you want a tubo that will spool really fast i would get a 14b, i had both turbos on my dohc zc at one time and i thought the 14b sucked ass, topend sucked, the 60 trim didint spool that late and the top end was a way way better.

ibby 02-17-2005 04:03 PM

Re:z6 turbo size?
 
.43 , .60AR ;)

thats what u want

boosted_EJ 03-02-2005 06:57 PM

Re: z6 turbo size?
 
i am still debating between T3 60 trim and super 60 for my D15B aswell........ either way both are a good choice IMO

CRXDrew 03-04-2005 08:37 AM

Re: z6 turbo size?
 
14b is great on my A6/Z6 minime. Cheap and effective. 14b has supported 300HP on many dsm's.

SkunT 03-04-2005 08:42 AM

Re: z6 turbo size?
 
t3, 42/48, i am very happy with it. full of boost all the way through, begins spooling right away, fully boosted by 4K rpm's (i think that will change with a DP)

i wouldn't put anything else on there, personally.

I rode in a t25 z6 powered hatch, on a 100% hmt kit, and honestly, it ran just as good as mine. lots of people say "it dies out, blah blah blah" this thing was fully boosted by 3500rpms, and held out all the way through, so i would also go with a t25 if i had to make another choice.


All times are GMT -5. The time now is 03:23 AM.


© 2024 MH Sub I, LLC dba Internet Brands