Would a standard Vaccum Manifold...
Be good for an oil distribution block. I was planning to run a -6an line to the feed of the distribution block and run a -3an line for my turbo feed line to one port, one port would be for my oil pressure sending unit for my oil pressure gauge and the other would be for my factory oil pressure sending unit. I guess what I'm asking is would it flow enough to run those components without any problems.
Thanks for any help, Lee |
Re:Would a standard Vaccum Manifold...
yep.
i wouldnt not suggest using clamps/barbs. |
Re:Would a standard Vaccum Manifold...
Yeah I was gonna use pipe fittings and what not.
|
Re:Would a standard Vaccum Manifold...
Do you already have the Vac Mani and just want to use it? Because there are easier and cheaper ways if you dont already have it...
|
Re:Would a standard Vaccum Manifold...
I've not yet bought it but mcmaster sells them for like 13 dollars and I wanted something clean in the engine bay. What were your suggestions?
|
Re:Would a standard Vaccum Manifold...
2 tees with nipples between em works. but if your going for looks, prolly not the nicest looking thing :)
|
Re:Would a standard Vaccum Manifold...
yeah thats what I was running before and it seemed to work fine I just wanted to kinda clean up the engine bay and make it looks a lil nicer.
|
Re:Would a standard Vaccum Manifold...
Originally Posted by f0rsfed
I've not yet bought it but mcmaster sells them for like 13 dollars and I wanted something clean in the engine bay. What were your suggestions?
Originally Posted by xenocron
http://www.-------------/carpics/option2.jpg
This is a screen capture of an order at www.mcmaster.com for an oil feed line setup that includes everything you need to T off the firewall instead of the back of the Honda block like many do. Safer and for the price hopefully it passes the likes of the HMT crew... Part numbers are in the screen shot for your ordering convience ;) |
All times are GMT -5. The time now is 03:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands