Wont go over 5K with boost
I just finished installing my turbo kit (about ------- time) but I cant go over 5Krpm that easy, it bogs and really just takes for ever to reach 6Krpm. I have 2(or less) degrees of retard. on the distributer. I think I need to mess around with cam gear, what do you guys think???Also I'm barely boosting 5 psi at 4Krpm and it stays still after 5Krpm
My setup HF manifold, running a TDO4L, with 440cc DSM injectors, and Hondata. Thanx |
Re:Wont go over 5K with boost
could be a tuning problem, maybe too much fuel, but I know nothing, my car is broken.
|
Re:Wont go over 5K with boost
any lights?
|
Re:Wont go over 5K with boost
No lights, it idles fine but it kinda backfires/bogs a little bit but really cant go over 5krpms
|
Re:Wont go over 5K with boost
whats your a/f:?
|
Re:Wont go over 5K with boost
Who tuned the Hondata? You or a dealer?
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:Wont go over 5K with boost
what kinda of air filter is on the turbo?
also, i'd say its either running too rich, or too lean. you should take it to a dyno for some tuning. |
Re:Wont go over 5K with boost
Too rich...while out last night at full boost and throttle i was below 9 afrs and the motor died at 5k...
lean it out a touch above 5k rpms |
Re:Wont go over 5K with boost
My friend is a Hondata dealer; so you said its probably to rich, I'll hook up a wideband and check it out. But damn its feels good to be boosted (too bad its really not tuned). The whirl of the turbo is ------- loud!!!!!I'll get back with you guys w/ pics and might need more advice for tunning my car. Thanx I really appriciate all the info. I've learned and will continue to learn, I've never thought I get this far, but I finally did.
P.S. Merry Christmas to all HMT members |
Re:Wont go over 5K with boost
Hey man, i had the same problem with my car, it wouldnt go above 5K and i tried everything i could, it ended up being my timing, even though it would run fine n/a, but when under boost there was no hope in it getting over that, so if i was you, i would play around with the dist. and see if it helps or hurts any, and then go to the cam gear, good luck and Merry Christmas
|
All times are GMT -5. The time now is 06:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands