It won't fit! NoooooOOOOOoOo!
 

Attachment 36476

Attachment 36477

Attachment 36478

Attachment 36479




Haha, just thought yall would get a kick, I'm getting closer.
Turbo > Radiator

Yall should see the rear bank ROTFLMAO!

Re: It won't fit! NoooooOOOOOoOo!
 

V cars shouldnt be mounted that way, its just wrong. at least your plugs are mounted in the center of the head so they arent that bad to change..

Re: It won't fit! NoooooOOOOOoOo!
 

Just take the radiator out, you dont need it anyway, its like power steering and a/c....just usless those damn radiators.

Re: It won't fit! NoooooOOOOOoOo!
 

just mount your radiator somewhere else.. like in the trunk

Re: It won't fit! NoooooOOOOOoOo!
 

what car and moer it that man

Re: It won't fit! NoooooOOOOOoOo!
 

just get a delsol halfcore. if it can cool down the mad jdm power of vtak it can cool anything ;D

Re: It won't fit! NoooooOOOOOoOo!
 

Holy ----. Proofread your posts.

Re: It won't fit! NoooooOOOOOoOo!
 

dang, those are some clean heads. ES 300? I would like to think by the name it sounds like a Lexus but it can't be......?

Re: It won't fit! NoooooOOOOOoOo!
 

why twin turbo when u can go with a big singal >:D
or go with a smaller singal for respond?

Re: It won't fit! NoooooOOOOOoOo!
 

what car is that and what moter

Re: It won't fit! NoooooOOOOOoOo!
 

3vz-fe 3.0L v6
One of the older school Toyota v6's they hella overbuilt.

Re: It won't fit! NoooooOOOOOoOo!
 

I've seen people mount the turbo where the cruise control and battery used to be.

Re: It won't fit! NoooooOOOOOoOo!
 

Yes there are three.

Tony Leung's 501bhp '94 Camry - Fully built 1mz-fe, T66 @ 14.7psi (Lots of room on the engine)

Attachment 36455




Sean McElligot's >400bhp '92 Lexus ES 300 - Stock bottom end 3vz-fe, GM-8 @ 14.7psi
( > Is the math symbol for greater than. Just throwing that in for the newbie morons that couldn't finish the first few years of school!)

Attachment 36456




shidosha01 '99 Solara - Stock bottom end 1mz-feT66 @282 WHP at 8psi
(Blew a hole in the aluminum block dynoing a few more psi & is being rebuilt for 14-20psi.)

Attachment 36457