HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   will i have a problem or not (https://www.homemadeturbo.com/forced-induction-7/will-i-have-problem-not-2550/)

dastinker8 Mar 5, 2003 11:13 PM

will i have a problem or not
 
ok here is my setup on a 95 civic dx coupe
91 cx exhaust manifold
94 14b turbo /internal wastegate
apexi bov
95 thunderbird intercooler
steel charge pipes and downpipe
stainless steal oil lines
brake lines as coolant lines
450cc dsm injectors with resistors
Apexi Safc, boost guage, oilpressure gaue, and fuel pressure guage.
stock fuel pump,

If everything is hooked up right, then my engine should start up correctly without a check engine light right???

when you tune your apexi then you shouldnt throw a code or anything... it should start up .. maybe a ruff idle at first untill i tune the apexi correct... imma be putting this on as soon as my apexi comes in... thanks any imput would be appriciated


MR_DR_PEP Mar 5, 2003 11:16 PM

Re:will i have a problem or not
 
you won't get a CEL (check engine light) with the safc...

setup looks good. What are you doing about timing? Got to retard the timing a little bit... .5 - 1.0 per pound of boost to keep detonation out of play

dastinker8 Mar 5, 2003 11:25 PM

Re:will i have a problem or not
 
say what... i never read anything on timing..... or people doing that... how do you do that ?????????????? DO you HAVE to..

scttydb411 Mar 5, 2003 11:27 PM

Re:will i have a problem or not
 
do you need to retard using the hack? i thought if you were able to tune the fuel wouldn't detonate...or is this just extra precaution?

dastinker8 Mar 5, 2003 11:29 PM

Re:will i have a problem or not
 
:o ik now for real yo... bring in the experts..... i aint tryin to have my ---- blow up the first day i put it on cause i didnt retard ;D

MR_DR_PEP Mar 5, 2003 11:35 PM

Re:will i have a problem or not
 
when you retard the timing, it makes the combustion go off a little further in the stroke (later in the stroke). Get a used MSD External Igniton off ebay or something:

https://www.homemadeturbo.com/turbo_...nagement_P.jpg

You need a MSD Standalone unit. It has an external coil, and a cap to go on your distributor + wire. They will have a little nob called "boost retard" that you can put inside the cabin of your car and adjust it how you like.

dastinker8 Mar 5, 2003 11:59 PM

Re:will i have a problem or not
 
will i be good if i dont retard the timing when i first put it on..... is there any other way to retard timing thats cheap.... and if i get no pinging when the setup is on at 8psi am i good?

leed Mar 6, 2003 01:21 AM

Re:will i have a problem or not
 
Id take the base timing down 2-3 degrees untill you can score an MSD or Crane igniton box w/ a boost retard function.
Ive never used an AFC hack for fueling, but a D16a6 fueled via a rising rate and intercooled at 6-7 psi did not require any retard at all.

Lots of cheap MSD's and Cranes on Ebay, check it out.

dastinker8 Mar 6, 2003 03:09 PM

Re:will i have a problem or not
 
mmm.... never messed with timing.. how do you even do that...... is there an article on how to retart timing.... or can someone just tell me... Thanks


and what do you consider cheap 150 dollars?

45psi Mar 7, 2003 02:54 PM

Re:will i have a problem or not
 
before you start your car, after intalling the turbo setup, reset your ECU. you'll be like "why is my car not starting?" otherwise.


All times are GMT -5. The time now is 07:11 AM.


© 2026 MH Sub I, LLC dba Internet Brands