agreed...It prevents pcv blow by from getting back into the intake system of your car. Without one your rasking lowering octane rating because of all the blowby in your intake air causing detenation.

 

It's correct. Read closely. I do and I have nothing...


JP

 

lol

 

On my D16y8 i was able to access the PCV from under the car and or from above the motor by reaching around the side of the intake manifold. Help from a friend never hurts!

 

i made a catch can like this

http://www.cb7tuner.com/vbb/showthre...threadid=11009

 

josh, the original poster isnt totally wrong. oil leaks can come from positive pressure in the crank case causing air (and eventually oil to start leaking from places like your oil pan gasket.

a catch can not only eliminates the blow by gasses, but should also introduce vacuum into the crank case to aid in ring seal. i have to go, but ill finish this post later

 

uber tite

 

All right, Im doing the setup with the compact filter between the PCV valve and the IM. Ive also got a filter on my valve cover (AKA breather filter). Will this setup be good or, is there anything else I can do to safegaurd the engine?

 

I think your looking for more of a breather setup. i'd go with the endyne kit if you are a b series. its really a quality kit.

 

Ill check out the Endyne kit, but, Im running a D16A6/T3.