where can i get a turbo gasket kit?
03-03-2005, 07:54 AM
#1
1.0 BAR
Thread Starter
Join Date: Apr 2003
Posts: 384
where can i get a turbo gasket kit?
ive got a t3 from a merkur xr4ti and i need to get a gasket kit for it. i think i do at least. i dont have any gaskets at all for this thing and im not sure where to go to get them i tried looking on egay but found nothing. anyone know where to get them or if i need them at all?
03-03-2005, 08:53 AM
#3
1.0 BAR
Thread Starter
Join Date: Apr 2003
Posts: 384
Re: where can i get a turbo gasket kit?
Yea its a t3 .48/.60 60 trim. okay lets see if i can explain.
gasket between the turbo and manifold
gasket between exhaust flange and turbo
gasket between inlet pipe and turbo
gasket between outlet pipe and turbo
gaskets for oil and water lines (im using a steathmode kit so i dont need those)
but im assuming that someone out there makes a kit that comes with all these gaskets? and if i dont run any gaskets at all will it cause any leaks? im assuming that most people just dont run gaskets am i right??
gasket between the turbo and manifold
gasket between exhaust flange and turbo
gasket between inlet pipe and turbo
gasket between outlet pipe and turbo
gaskets for oil and water lines (im using a steathmode kit so i dont need those)
but im assuming that someone out there makes a kit that comes with all these gaskets? and if i dont run any gaskets at all will it cause any leaks? im assuming that most people just dont run gaskets am i right??
03-03-2005, 10:15 AM
#4
0.0 BAR
Join Date: Aug 2004
Posts: 41
Re: where can i get a turbo gasket kit?
you dont need a gasket between the inlet pipe and the turbo, the outlet pipe and the turbo, you also shouldnt need gaskets between the manifold and the turbo and the dp and the turbo if the surfaces are flat, you can however use copper gasket spray on the surfaces. also i believe atpturbo.com has them and fast-turbo.com has gaskets for turbos, i'm not exactly sure, check them out.
03-03-2005, 10:25 AM
#5
Guest
Posts: n/a
Re: where can i get a turbo gasket kit?
why would you tell him not to use a gasket on the turbo to manifold? Even if its flat i would want one there, go to ford and get one for that, as well as the outlet of the turbo to the pipe that comes off of it (or use rtv type ---- for that one)
03-03-2005, 02:21 PM
#7
3.0 BAR
Join Date: Jan 2003
Posts: 4,438
Re: where can i get a turbo gasket kit?
Check on ebay or make your own. The t3 turbine inlet gasket should be the stainless steel shim type gasket. Ive seen some guys run without gaskets and be ok and others leaked badly... id just get the gasket so you dont have to worry about it
Thread
Thread Starter
Forum
Replies
Last Post
staticchmbr
Hybrid/Tech
4
11-03-2005 02:32 PM
