where can i find a good deal on injectors?
i am gonna be boosting soon and i want to use some 440cc injectors. I dont want to use DSM ones, i just want to buy some that fit a civic. So my question is where can i find the best deal on injectors?
|
Re: where can i find a good deal on injectors?
Got a set of basiclly brand new rc 310's for $ 100 shipped.
|
Re: where can i find a good deal on injectors?
Originally Posted by Smooth_Imports
Got a set of basiclly brand new rc 310's for $ 100 shipped.
|
Re: where can i find a good deal on injectors?
DSM ones do fit a civic!!
Don't so lazy and spend the 10min if needed!!! Or spend the extra cash and buy new RCs |
Re: where can i find a good deal on injectors?
Originally Posted by bumblezc
DSM ones do fit a civic!!
Don't so lazy and spend the 10min if needed!!! Or spend the extra cash and buy new RCs |
Re: where can i find a good deal on injectors?
Resistors or Resistor Box, doesn't matter. Cut the 1 wire goingt o each injector and put a resistor in between.
FYI: Peak & Hold Low Impendance injectors (Like DSMs) are better for Performance wise over saturated. |
Re: where can i find a good deal on injectors?
Originally Posted by bumblezc
Resistors or Resistor Box, doesn't matter. Cut the 1 wire goingt o each injector and put a resistor in between.
FYI: Peak & Hold Low Impendance injectors (Like DSMs) are better for Performance wise over saturated. |
Re: where can i find a good deal on injectors?
radio shack. they are like a few bucks for all 4. just wire them in.
hey dont you still need resistors for some rc's and tuner toys anyways? matt |
Re: where can i find a good deal on injectors?
dsm injectors are the way to go. i put mine in with installing the resistor box in like 30min and mine looks stock as ----. i ground off the little tab on the injectors that keep the stock honda plugs from going on so i didnt have to splice in different clips and i removed the injector wires from the plug and put them into the resistor box plug so it all looks factory
|
Re: where can i find a good deal on injectors?
Originally Posted by PhilStubbs
dsm injectors are the way to go. i put mine in with installing the resistor box in like 30min and mine looks stock as ----. i ground off the little tab on the injectors that keep the stock honda plugs from going on so i didnt have to splice in different clips and i removed the injector wires from the plug and put them into the resistor box plug so it all looks factory
|
Re: where can i find a good deal on injectors?
I got 4 2nd gen DSM 450's for $40 shipped on Ebay.
|
Re: where can i find a good deal on injectors?
Originally Posted by Curbow_USMC
Originally Posted by PhilStubbs
dsm injectors are the way to go. i put mine in with installing the resistor box in like 30min and mine looks stock as ----. i ground off the little tab on the injectors that keep the stock honda plugs from going on so i didnt have to splice in different clips and i removed the injector wires from the plug and put them into the resistor box plug so it all looks factory
Do you have or can you take a pic of your resistor box and your injector set up so i can see what you are talking about? |
Re: where can i find a good deal on injectors?
gotcha......thanks
|
Re: where can i find a good deal on injectors?
Bump!
|
Re: where can i find a good deal on injectors?
3 Attachment(s)
im not sure what you want to see so i took a few pics. if you want anything specific let me know
Attachment 37135 DSM injectors with honda clips. no splicing Attachment 37136 and then this one just cause i want to. lol Attachment 37137 |
Re: where can i find a good deal on injectors?
those are good pix but i was wanting to see how the wires were ran. The shop that i might let do it uses resisters. They said they are a cleaner look. what do you think about that?
|
Re: where can i find a good deal on injectors?
this is the resistor box. it doesnt get any cleaner than that. nobody could put resistors in even half that clean
|
Re: where can i find a good deal on injectors?
yea... that is pretty clean. i will look for a pic of resistors. then i will contact that shop and see if they will do the resistor box. Thanks for the pix.
|
Re: where can i find a good deal on injectors?
the pics are right here in hmt.
https://www.homemadeturbo.com/tech_p...dsm_injectors/ |
Re: where can i find a good deal on injectors?
yea. The box looks much better, Thanks!
|
All times are GMT -5. The time now is 02:46 PM. |
© 2024 MH Sub I, LLC dba Internet Brands