4g64t

the wastegate is on a 14b i had to rotate the compressor housing to fit the turbo. so when i rotated it the wastgate flapper opened up about [_____] that much and stayed open so i added washers to keep the flapper closed. now im just wondering what the side effects will be from doing this?

jspec89

as long as the bolts are tight and the flapper is closed i dont see why it wouldnt work right.

4g64t

will full boost still be 8psi i was thinking since the arm has moved farther out that it has to effect the level somehow.

topspeed

if it stays close at this point and you can pull the wastegate with flapper to open up as it would on air then you would be fine.