HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   what u all think (https://www.homemadeturbo.com/forced-induction-7/what-u-all-think-30803/)

seerex 12-01-2004 12:17 AM

what u all think
 
I have a 91 crx hf with a 95 D16z6 i'm almost done turboing it, right now i plan on runing 5psi with stock injectors, and no fmic and the Pg7 for now, i also have a GSR tb, the turbo is off a old Nissan, also using the std main. I know its hard to say but about how much power do u all thing i might make.Other mods 2.5inch piping with only 2 bends.

djfob 12-01-2004 12:45 AM

Re:what u all think
 
hard to say without knowing the size of turbo.....my guess no more than 160 whp :-\

90turbohatch 12-01-2004 12:59 AM

Re:what u all think
 
You are gonna use your stock injectors and boost 5 psi? You might make 145-170 hp for a few minutes and then blow up your motor. No intercooler or fuel management? Stock timing also? ::) I would hope you are planning to at least use a rising rate fpr.

djfob 12-01-2004 01:26 AM

Re:what u all think
 
I was assuming he'd be at least smart enough to use an fmu :-\

SpankedYA! 12-01-2004 05:48 AM

Re:what u all think
 
I second the thrown rod theory.

PureCRXtasy 12-01-2004 12:06 PM

Re:what u all think
 
What ECU are you using? If you have a p28, just chip it, get some 450's and run Uberdata. You can't boost without adding more fuel to mix with all the extra air you're adding unless you want a big paperweight under your hood.

robs99si 12-01-2004 03:15 PM

Re:what u all think
 
i think you're gonna blow up your engine without good fuel management.

hotrex 12-01-2004 06:33 PM

Re:what u all think
 
less than 150 whp

seerex 12-01-2004 06:50 PM

Re:what u all think
 

Originally Posted by djfob
I was assuming he'd be at least smart enough to use an fmu :-\

Thats why i was asking what u all thought, plus i would get a fmu if it wasn't for the fact that i'm dead broke, another thing if i were to get a chip burner, which 1 to get and how much is it going to run me.
Thanks


All times are GMT -5. The time now is 09:04 PM.


© 2024 MH Sub I, LLC dba Internet Brands