Forced Induction Custom FI Setup Questions

what psi you guys running on d16

Thread Tools
 
Search this Thread
 
Old 10-06-2003, 12:11 PM
  #1  
0.5 BAR
Thread Starter
 
ReignOfChaos's Avatar
 
Join Date: Jul 2003
Posts: 174
Default what psi you guys running on d16

i'm debating to run more than 8psi... i was going to run 9 or so to compensate for my small turbo not able to provide enough at redline.. losing 2psi at redline so maybe if i boost 9 or 10 then i'll have 7-8.,,,,.. right now i got 6or so at redline, boost controller helps a bit but not much
ReignOfChaos is offline  
Old 10-06-2003, 12:46 PM
  #2  
1.5 BAR
 
89dxhunchback's Avatar
 
Join Date: Jan 2003
Posts: 1,115
Default Re:what psi you guys running on d16

It doesn't work like that.
if you car falls to 6 psi from 8psi, and you turn the boost to 25psi then your car is STILL going to fall down to 6psi by redline.

The stealth TT guys know this all too well. No matter how much boost ( even 20psi sometimes ) the factory TD04-9Bs ALWAYS fall down to around 10psi ( appox, some mods help ).
89dxhunchback is offline  
Old 10-06-2003, 01:56 PM
  #4  
1.5 BAR
 
scttydb411's Avatar
 
Join Date: Dec 2002
Posts: 1,008
Default Re:what psi you guys running on d16

i run 10psi daily driven. as long as you're tuned you should be ok. be careful of spiking above though. what turbo you running again? i would think even a small turbo like an rhb5 would hold at least to redline.
scttydb411 is offline  
Old 10-06-2003, 04:27 PM
  #6  
1.0 BAR
 
racinskittle's Avatar
 
Join Date: Jun 2003
Posts: 313
Default Re:what psi you guys running on d16

I run 9psi untuned. D16z6. pulls hard and feels good. But i need some moderate tuning. Just can't seem to get a ------- downpipe made properly
racinskittle is offline  
Old 10-06-2003, 05:44 PM
  #7  
0.5 BAR
Thread Starter
 
ReignOfChaos's Avatar
 
Join Date: Jul 2003
Posts: 174
Default Re:what psi you guys running on d16

thanks people, i might bump it up just a tee bit to 8.5 maybe 8.8, close to 9.... it spikes to 9 at times although set at 8...

too bad there isn't a boost controller that is CHEAP that can make the WG function normally at 3000-5500 rpm then just shut the damn gate at 5500 to redline.. im' sure it's sitll opening a bit... i don't belive the ihi rhb5 will not hold even 7psi at redline on my puny sohc 1.6

but damn, now at 8psi the tires really break loose in 1st....
ReignOfChaos is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
-SKUM-
Fabrication
8
03-15-2008 07:13 PM
superjunprelude
Forced Induction
14
12-11-2005 05:17 PM
accordepicenter
General Discussion
11
05-29-2005 09:10 PM
mr8
Forced Induction
12
05-14-2003 02:33 PM
civicunrest
Forced Induction
8
04-21-2003 03:57 PM



Quick Reply: what psi you guys running on d16



All times are GMT -5. The time now is 01:04 AM.