HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)

- Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)

- - What plugs? (https://www.homemadeturbo.com/forced-induction-7/what-plugs-28637/)

I got a B16a2 powered Civic, T3/T04e turbo bolted on up there with JE pistons and Eagle rods. Currently running just 11psi (Damn stock map sensor!)

I have been running Denso IK24 plugs but cos some n00b tuned it and it runs rich it keeps sooting up the plugs, I also heard these plugs suck?

What plugs should I run?

Stock is BKR6E-N-11, I have been told to go for BKR7E-11 but is that cold enough? I wanna run more boost soon and I dont want to melt a plug.

Maybe chuck some 8's in but what NGK code?

Thanks for your help

Nick

I just run the oem's in my setups. havn't had any detonation problems whatsoever. Just gap them to .30" and you shouldn't have any problems, especially since your on the rich side.

This is what I did to an IK24 Denso Iridium plug

http://www.frag-force.com/files/misc/plug2.jpg