Hey guys

Im kind of stumped on how I should go about doing this setup.

First off the car is an 88 Crx Si with a D16 motor

Im stumped on how I should run this setup, I dont know where to put everything in what order and what the laws of rules of making the best power are.

Check out this pic first



Its small but you get the idea, now heres my questions.

Im going to run a 3" downpipe into a mechanically operated 3" exhaust cutout. you can see in the pic how it is curved, i want 1 90 bend and then almost straight down about 10" into the cutout

Now as you can see my wastegate comes out just above the downpipe but it about 3.5" BEHIND it

I need to know where to make the wastegate dump enter the downpipe and if I am allowed to make it enter 2-3" above the cutout or if it has to enter BEFORE the 2 02 bungs

Someone please clarify that for me

Im just lost really on the fact if I can make the wastegate dump enter AFTER the 2 02 bungs or if one has to be ahead or if there any rules like that?

If it matters its OBD0, I should maybe also mention that Im going to have a full 2" exhaust being routed back from the downpipe

Let me know if you guys need anything else or pics or whatever