Forced Induction Custom FI Setup Questions

what kind of turbo do i have????

Thread Tools
 
Search this Thread
 
Old 11-22-2004, 10:40 PM
  #1  
1.5 BAR
Thread Starter
 
DeleriouS's Avatar
 
Join Date: Aug 2004
Posts: 710
Default what kind of turbo do i have????

i was wondering what kind of turbo i have...i think it is a 14b but i am not sure. the numbers read - TRO 759 and its a GARRET. the compressor says that it is a .48 and on the exhaust housing it reads .49 . and it doesnt fit up to a t3 flange. i think it came off of an eclipse.

also what is the difference between a 14b and a t25? thanks
DeleriouS is offline  
Old 11-22-2004, 10:55 PM
  #2  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:what kind of turbo do i have????

by chance does your turbo look like this?









My guess is a T25 off a 2g DSM.

HMT-Admin is offline  
Old 11-22-2004, 10:59 PM
  #3  
3.0 BAR
 
hotrex's Avatar
 
Join Date: Dec 2002
Posts: 12,568
Default Re:what kind of turbo do i have????

t25 is slightly smaller than a 14b.
hotrex is offline  
Old 11-22-2004, 11:03 PM
  #4  
1.5 BAR
Thread Starter
 
DeleriouS's Avatar
 
Join Date: Aug 2004
Posts: 710
Default Re:what kind of turbo do i have????

ya it looks like that...what are the stock wastegates set at? is this a decent turbo for a b18b (integra LS) motor? when do you think i will hit full spool? 2500rpms?
DeleriouS is offline  
Old 11-22-2004, 11:11 PM
  #5  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:what kind of turbo do i have????

A t-25 is considerably smaller than a 14b, The 14b and the t25 both have internal wastegates set at 8psi (11-12psi with the stock EBS)

A t25 on a B18b is going to spool incredibly fast, these things spin really fast on D-series, will it work? yup.. The B18b doesnt need to rev high to make power, plus with this turbo being small its really going to die out on the top end on a ls. I'd look for something bigger, but if not it will work.

Jeff
HMT-Admin is offline  
Old 11-22-2004, 11:21 PM
  #6  
1.5 BAR
Thread Starter
 
DeleriouS's Avatar
 
Join Date: Aug 2004
Posts: 710
Default Re:what kind of turbo do i have????

well this is just a start. when do you think that the turbo will die out? my rev limiter is set at like 7000rpms. do you think i will have full boost until i hit redline? thanks
DeleriouS is offline  
Old 11-22-2004, 11:30 PM
  #7  
Administrator
 
HMT-Admin's Avatar
 
Join Date: Dec 2002
Posts: 13,991
Default Re:what kind of turbo do i have????

It will have no problem making full boost, and holding it all the way to redline, however every turbo ls I have ever done is really peaky, even with a fairly decent sized turbo. Meaning they peak HP out real low around 45-5000ish and then just fall. It's mainly head design and camshafts that wont let it breath on the top end.



Heres a dyno chart of a LS with a decently sized T3 @ 10psi, see how it peaks out pretty fast? You wont need to rev it that high to make power.

HMT-Admin is offline  
Old 11-23-2004, 07:55 AM
  #8  
1.5 BAR
Thread Starter
 
DeleriouS's Avatar
 
Join Date: Aug 2004
Posts: 710
Default Re:what kind of turbo do i have????

so then i would have to shift pretty much right at 6000rpms?
DeleriouS is offline  
Old 11-23-2004, 10:12 AM
  #9  
3.0 BAR
 
robs99si's Avatar
 
Join Date: Apr 2003
Posts: 2,612
Default Re:what kind of turbo do i have????

i'd get bigger cams and port out the head some in the future. the turbo will work since the engine on its' own doesn't make power til redline. if you want power til redline=bigger turbo+cams, port and polish.
robs99si is offline  
Old 11-23-2004, 02:50 PM
  #10  
3.0 BAR
 
turboDA6's Avatar
 
Join Date: Jul 2004
Posts: 3,207
Default Re:what kind of turbo do i have????

i have a tiny turbo on my ls, i dont even take it to redline. u can feel the power til a certain rpm and it feels like it pulls harder when i shift around 5,500 or 6. only time i go above that when doing a burnout
turboDA6 is offline  


Quick Reply: what kind of turbo do i have????



All times are GMT -5. The time now is 09:36 PM.