HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   What if???? (https://www.homemadeturbo.com/forced-induction-7/what-if-53932/)

G13BT 01-15-2006 02:13 PM

What if????
 
What would it happen if the turbo oil drain was bellow oil level in the sump???????

The thing is there´s no point in the oil sump were to put the oil drain above oil level...

HMTguy 01-15-2006 02:19 PM

Re: What if????
 
There has to be somewhere above the oil level.

If your turbo drain is below the oil level, then oil may get backed up in the turbo and not be able to escape fast enough, and it will force it's way through your turbo seals and they will be shot sooner or later.

MikeJ-2009 01-15-2006 02:21 PM

Re: What if????
 
I believe some people have put the drain in the oil level as long as the turbo/drain line connection is above the oil level point. I can't say for sure because it's one of those techy science involved deals, but I believe some have had success doing it this way.

Tom-Guy 01-15-2006 02:42 PM

Re: What if????
 
I've seen low mounted oil drains that worked out okay, but you have to make sure to use big diameter drain line.

You could also punch a drain hold through the skirt in your block, right above the oil pan. Some of the Miata turbo kits use the dipstick as a drain... heh.

G13BT 01-15-2006 03:07 PM

Re: What if????
 
http://img426.imageshack.us/img426/5170/im0008491mw.jpg

EG-prince 01-18-2006 04:11 PM

Re: What if????
 
you can use less oil in your engine too-- like go just a little over the lower line on the dipstick instead of all the way up to the second line. That and remember the oil level when running is different than when off because of all the oil running through the engine, so it might not be below level anyway when the engine is running


All times are GMT -5. The time now is 12:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands