what do you guys think of my HMT setup?
Hello!
this is what im going to put into my Civic HB 1,6i ZC next month! what do you think? Turbo from Volvo S60R model (flow prepped kkk24 turbo) (new) Engine management from Civinco enginering (new) 550cc RC injectors (new) VW Golf Gti intercooler 2001model (used) 50mm BOV (new) ss autochrome turbo manifold (new) 3" downpipe+catback AEM wideband o2 sensor and computer (new) Steel braided oil feed lines+retur line (new) well thats about it! the car allready has MSD ignition,Ported and fixed cylinder head,Chipped ECU,adjustable fuel preassure,60mm trohttlebody, a cold air intake, 2" polished exhaust+extraktor. im sure iim forgot something but thats some things that already have been done! :) planning to run about 12psi the engine has stock comp but i think 12psi shouldent be any problem with my enginemanagement and some carefull driving ;) so what do you think about it? plz tell me! ;) can try to fix some pics on the car if someone is interested too se it! this car was sold in Finland with the D16A9 engine original! kinda special i think!? |
Re: what do you guys think of my HMT setup?
i thought this ---- was already in your car. you suck
|
Re: what do you guys think of my HMT setup?
Originally Posted by Civinc
ss autochrome turbo manifold (new)
|
Re: what do you guys think of my HMT setup?
no next month i will put it there... have all the stuff n a nice shelf at the moment! and the tubo compressor house nededs to be welded a little so im still waiting to get it back.... ok im suck well not so positive fist post i get
|
Re: what do you guys think of my HMT setup?
Originally Posted by Mista_Shrpnl
Originally Posted by Civinc
ss autochrome turbo manifold (new)
|
Re: what do you guys think of my HMT setup?
Not actually, the best way is to let 10,000 people waste THEIR hard earned money to save you a few hundred bucks and hours of adjusting your DP and hot-pipe to work with a different manifold
|
Re: what do you guys think of my HMT setup?
Originally Posted by SloS13
Not actually, the best way is to let 10,000 people waste THEIR hard earned money to save you a few hundred bucks and hours of adjusting your DP and hot-pipe to work with a different manifold
|
Re: what do you guys think of my HMT setup?
Dont say no one warned ya. And dont come bitchin when it breaks 5 miles down the road either.
|
Re: what do you guys think of my HMT setup?
Originally Posted by Mista_Shrpnl
Dont say no one warned ya. And dont come bitchin when it breaks 5 miles down the road either.
|
Re: what do you guys think of my HMT setup?
LoL... dude, you are the reason that SSautoshit is still in business.
No matter how many people waste their money on their products only to have them break people will still come on here and say, "it was cheap, so I don't care"... You are going to end up spending more in the long run! Your manifold will break, and then you will have to buy another one. Oh well, it's your money not mine. I would run an HF manifold before ssautoshit any day. |
Re: what do you guys think of my HMT setup?
ok eveybody hates my manifold! i undestand that know plz lets talk about something else! or is that all you guys want to talk about? plz if yu gonna talk about the manifold then tell me all your reasons why you all hate it? btw im seen so much vorse manifolds then ssautochome's! that have been homemade....
|
Re: what do you guys think of my HMT setup?
Originally Posted by Civinc
ok eveybody hates my manifold! i undestand that know plz lets talk about something else! or is that all you guys want to talk about? plz if yu gonna talk about the manifold then tell me all your reasons why you all hate it? btw im seen so much vorse manifolds then ssautochome's! that have been homemade....
As for your SSautoshit manifold, if you weld a bracket to the turbo flange and bolt it to your block to support the weight of the turbo, you might be fine, but dont say no one warned you. SSautoshit is the crapiest ---- out there, you get what you pay for buddy. |
Re: what do you guys think of my HMT setup?
Originally Posted by ej1 wilcox
LoL... dude, you are the reason that SSautoshit is still in business.
No matter how many people waste their money on their products only to have them break people will still come on here and say, "it was cheap, so I don't care"... You are going to end up spending more in the long run! Your manifold will break, and then you will have to buy another one. Oh well, it's your money not mine. I would run an HF manifold before ssautoshit any day. |
Re: what do you guys think of my HMT setup?
Originally Posted by Civinc
yeah i heard som pretty bad ---- about them! but i will find out myself! always the best way to test something :)
|
Re: what do you guys think of my HMT setup?
Originally Posted by Boost Creep
Originally Posted by Civinc
yeah i heard som pretty bad ---- about them! but i will find out myself! always the best way to test something :)
|
Re: what do you guys think of my HMT setup?
Originally Posted by Civinc
this car was sold in Finland with the D16A9 engine original! kinda special i think!?
|
Re: what do you guys think of my HMT setup?
Originally Posted by Civinc
ok eveybody hates my manifold! i undestand that know plz lets talk about something else! or is that all you guys want to talk about? plz if yu gonna talk about the manifold then tell me all your reasons why you all hate it? btw im seen so much vorse manifolds then ssautochome's! that have been homemade....
|
Re: what do you guys think of my HMT setup?
The little asian kids that do my welds are still learning, my producs are constantly improving.
|
Re: what do you guys think of my HMT setup?
Originally Posted by wdwalker
Originally Posted by Civinc
ok eveybody hates my manifold! i undestand that know plz lets talk about something else! or is that all you guys want to talk about? plz if yu gonna talk about the manifold then tell me all your reasons why you all hate it? btw im seen so much vorse manifolds then ssautochome's! that have been homemade....
|
Re: what do you guys think of my HMT setup?
Give him a break with his english, i'm assuming it's not his first language. Setup looks good and it sounds like you know what you're doing at least a little. I had a friend that ran the SSauto mani for 6 months and nothing ever broke on it. Yes, they're crap, but sometimes crap works. :-\
|
Re: what do you guys think of my HMT setup?
In all seriousness, I know a guy who's had an SS Autochrome for over 2 years and its still in 1 piece.
He hasn't taken it out of the box yet. |
Re: what do you guys think of my HMT setup?
Originally Posted by nonvtec
Give him a break with his english, i'm assuming it's not his first language. Setup looks good and it sounds like you know what you're doing at least a little. I had a friend that ran the SSauto mani for 6 months and nothing ever broke on it. Yes, they're crap, but sometimes crap works. :-\
|
Re: what do you guys think of my HMT setup?
---- man thats a downer.
Pls edit your post to ready. My Turbo plans. All this talk and the shits not yet on the car :P Hey SS you serious about them Asian kids. The ones I know can run circles arround most welders. They start welding at the age of arround 8-10 and are pros before they are out of their teens. |
Re: what do you guys think of my HMT setup?
I'll tell ya what you wanted to hear! Your setup is so freakin 8).
|
Re: what do you guys think of my HMT setup?
Originally Posted by Milanogisser
I'll tell ya what you wanted to hear! Your setup is so freakin 8).
|
Re: what do you guys think of my HMT setup?
Originally Posted by SloS13
In all seriousness, I know a guy who's had an SS Autochrome for over 2 years and its still in 1 piece.
He hasn't taken it out of the box yet. sounds like you have it all in place. dont take the flames to the ass too much, cause seriously, if it's crap...it's crap. these guys arent talkin that ---- to flame on your manifold. the least u could do is redeem yourself by saying that you'd try to reinforce it somehow or weld the ---- out of it, or put 2,000 braces on it to make it last. the worst thing you could do is try to back up and argue the quality of that manifold. |
Re: what do you guys think of my HMT setup?
i like the whole u get what u pay for statement not talking ----, just saying i try and get my ---- as cheap as possible that's why i come here. . . and i don't plan on paying anything for the ---- i get it's freebies that i try and use but i'll say that my cheap ass would use the ss auto chromes and agree just brace the ---- out of it and then when it break say ehhhh don't care it was free and i got what i paid for
|
Re: what do you guys think of my HMT setup?
I installed many ss atochrome turbo headers, on D, B and H serie honda and on nissan.
I use one single bracket to support the turbo and I always use a flexpipe. I never saw a crack on a SS header yet. And it's true, the product was improved over time. They remain cheap asian headers, with insuficient diameter and the design could be better too. The wastegate location really sucks on certain applications. |
Re: what do you guys think of my HMT setup?
My ssauto is "still" in one piece but I'm rocking a brace on mine. Also I'm hardcore with no flexpipe either in my down pipe and no problems "yet". I'll rock this fucker till it breaks into a thousand pieces or I find a topmount mani on the side of the road.
|
All times are GMT -5. The time now is 01:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands