i have everything setup and now its time to fill the bottle, what works best and wont rust my intercooler?

 

water
intercooler is aluminum, rusting will take years

 

is water really the best thing to use? what are some other options

 

rubbing alchole

 

gasoline

 

carbonoxide if your setup can handle it...

I know a diesel golf what gained in the dyno 60hp more with ioxide sprayer....

 

http://www.cardomain.com/item/NIE22000

 

distilled water and rubbing alcohol 50/50. distilled water so it doesnt corrode things and rubbing alcohol because it evaporates very quickly (which is how things get cold when wet)

 

thanks for the advice guys i'll probably make a co2 sprayer later on but i had some extra stuff laying around and thought this would be a good extra time project. i think im gonna try the 50/50 mix

 

The densities of rubbing alcohol and water are different so they'll separate. What I would do is run 2 different fluid tanks, one with alcohol and one with water. Then connect them to the intercooler sprayer setup. They will still separate in the lines. But say for instance you used a windshield washer pump. With a single bottle the water will go through first and then the alcohol, since the alcohol will float on the water. But with 2 bottles you'll get a consistent mix of alcohol from one bottle and water from the other in the lines.