what is cheaper,buy oil line kit, make my own
01-15-2004, 05:27 PM
#1
1.0 BAR
Thread Starter
Join Date: Jan 2004
Posts: 585
what is cheaper,buy oil line kit, make my own
I'm cheap, like almost everyone else here on HMT.com, so, should I just do a ton of research to find out everything I need for my t25/d16, or just buy a kit from stealthmode for $80. what is cheaper in the long run?
01-15-2004, 05:55 PM
#3
1.5 BAR
Join Date: Dec 2002
Posts: 882
Re:what is cheaper,buy oil line kit, make my own
yeh
buy stealthmodes..i did
it's no way i would have been lookin around tyring to put a pep boys o i l line kit together. All his stuff are earl fitting and nicely anodized.
plus you would be supporting, once again, and HMT member and business
buy stealthmodes..i did
it's no way i would have been lookin around tyring to put a pep boys o i l line kit together. All his stuff are earl fitting and nicely anodized.
plus you would be supporting, once again, and HMT member and business
01-15-2004, 06:37 PM
#5
Guest
Posts: n/a
Re:what is cheaper,buy oil line kit, make my own
if you want a nice, well put together kit, get stealthmode's. if you dont mind not having an oil pressure sender right on the back of the block, do what i did. Take the sender to a parts place and get a brass barb fitting to fit there. Go buy a few feet of line (i used aeroquip socketless line, it was cheap), and if you want, get a tee and put the sender inline somewhere.
01-15-2004, 09:02 PM
#6
0.5 BAR
Join Date: Dec 2003
Posts: 95
Re:what is cheaper,buy oil line kit, make my own
sorry to hijack your thread, but has anyone tried making their own hard lines? i mean using brake line type stuff - you can get a tubing bender and flare kit from harbor freight for $15-20 and aluminum tubing's a little over a buck a foot from the hardware store (i havn't looked for stainless). are the fittings really expensive or does everyone just like the look of braided lines? 
01-15-2004, 10:07 PM
#8
1.5 BAR
Join Date: Dec 2002
Posts: 882
Re:what is cheaper,buy oil line kit, make my own
Originally Posted by pa2play
ok, thanx, lol I love your video, halarious!!
bobski: i thought about that but the way my car is setup i would have to make a lot of bends i and didn't want to have to keep making trips the the Auotparts sotre for missing pieces. With stealth's you know you can put you car onthe jack and atleast have you oil feed and drain line hooked up for the turbo if not anything
I , personally, dont think the oil line and the part of the turbo kit you wnanna go cheap on.
Charge pipes before anything
my $.02
01-15-2004, 10:17 PM
#9
1.0 BAR
Join Date: Nov 2003
Posts: 452
Re:what is cheaper,buy oil line kit, make my own
i made my own. ---- was under 10 bucks. took some 1/4" copper line... 1/4" compression fittings..hooked em on the ends after cutting the line to the size i needed... the compression fittings end up bringing the ends down to exactly 1/8". works perfect.
01-15-2004, 10:25 PM
#10
0.0 BAR
Join Date: Jun 2003
Posts: 0
Re:what is cheaper,buy oil line kit, make my own
Originally Posted by bobski
sorry to hijack your thread, but has anyone tried making their own hard lines? i mean using brake line type stuff - you can get a tubing bender and flare kit from harbor freight for $15-20 and aluminum tubing's a little over a buck a foot from the hardware store (i havn't looked for stainless). are the fittings really expensive or does everyone just like the look of braided lines?
I did all my oil lines in brake line and rubber hose for the return. I bought all the necessary tee fittings and everything at NAPA for under $10. (2 returns and 2 feed lines
) SS is nice but not necessary, if your on a budget this is what I would reccomend. Make sure to use a tubing bender though to keep everything nice. Using brake lines also makes it real easy (and cheap) to install needle valves and gauges.If you are going to get SS get Stealthmode's. I never used them but damn they look nice and high quality
