HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Forced Induction (https://www.homemadeturbo.com/forced-induction-7/)
-   -   What can I resonably expect to make for horsepower on this setup? (https://www.homemadeturbo.com/forced-induction-7/what-can-i-resonably-expect-make-horsepower-setup-79952/)

jb18hatch 07-08-2007 04:06 PM

What can I resonably expect to make for horsepower on this setup?
 
I am new to the turbo D series realm and am going to pick up my engine next week. I am curious to know what I can make reliably for horsepower once the engine is tuned with hondata. To start with I will be using a Vafc.
Here are the specs:

d16z6
ARP head studs
steel headgasket
eagle rods
JE pistons
All new OEM bearings
Cast DRAG manifold
T3
FMIC
Venom fuel rail
750cc injectors
FPR
stage 4 clutch
38mm wastegate

The motor was being tuned and on the first pull the clutch gaveway but the car made 258 whp and 248tq at 4200rpms on 13psi.

What can I safely run for boost on this setup with an AFC tune? And how about hondata on the dyno?
Just curious what I am getting myself into here...
thanks
-Marc

BirdmanMD 07-08-2007 04:22 PM

Re: What can I resonably expect to make for horsepower on this setup?
 
http://i140.photobucket.com/albums/r...gnorin-ur-.jpg

Atticus 07-08-2007 05:18 PM

Re: What can I resonably expect to make for horsepower on this setup?
 
go ask the guy that built your engine and started to tune
i think you can expect like 20 more hp with the AFC rather then crappy ass hondata (not enough cells to tune :P)

turbo dave 07-09-2007 12:07 AM

Re: What can I resonably expect to make for horsepower on this setup?
 
i say you abandon hondata and the dont use the afc for tuning (i still have it for bling factor) and run chrome on a p06 ( i think thats the right ecu, i dont mess with anything but f/h engines)

reactone 07-09-2007 09:49 AM

Re: What can I resonably expect to make for horsepower on this setup?
 
All that work on the internals for a T3?? You probably should have invested in a T3/T4 instead.

bigdaddyvtec 07-09-2007 09:52 AM

Re: What can I resonably expect to make for horsepower on this setup?
 

Originally Posted by turbo dave
i say you abandon hondata and the dont use the afc for tuning (i still have it for bling factor) and run chrome on a p06 ( i think thats the right ecu, i dont mess with anything but f/h engines)

Crome owns you.

accordepicenter 07-09-2007 10:31 AM

Re: What can I resonably expect to make for horsepower on this setup?
 
sell the afc, get a bigger turbo and ditch that crappy drag unit, it has really piss poor wastegate placement to boot. Then you should be doing much better.

imburne 07-09-2007 10:37 AM

Re: What can I resonably expect to make for horsepower on this setup?
 
1 Attachment(s)
I say 700HP







Attachment 25889

fe3tcourier 07-10-2007 08:37 AM

Re: What can I resonably expect to make for horsepower on this setup?
 
according to the statistics section of this site, 87.3% of hmt users own that software!! i use open office instead...

fred.

dirtygsr94 07-14-2007 03:48 PM

Re: What can I resonably expect to make for horsepower on this setup?
 
how are you ideling it with 750cc injectors and an afc if you dont have anything tuned with hondata yet? super low to no fuel pressure and -50? i think you could easily get 830.2 out of that setup


All times are GMT -5. The time now is 12:51 AM.


© 2024 MH Sub I, LLC dba Internet Brands