|
Well I blew my motor. Researching a new setup.
Well I pushed her to hard and the stock bottom end couldn't handle it so I'm doing research to build it with forged low compression parts. Here's what I'm thinking so far.
Video carnage of my motor http://www.youtube.com/watch?v=sdBAjtBaXAk http://www.youtube.com/watch?v=BL7Lvme4SsY Motor is a D16Z6 Block Vitara pistons 8.5:1CP Not sure on the rings yet (the vitara pistons come with them but not sure on the quality) Eagle rods ACL rod and main bearings ARP head and rod bolts Head already P&P Crower stage 2 turbo cam Skunk 2 springs and titanium retainers Skunk 2 valves Turbo TD05 14B (may upgrade to a 16G) Intake HKS air filter 65MM JG throttle body stock Z6 intake manifold ported to match the throttle body 3 bar map sensor Ebay intercooler kit (flows really good and is the perfect size for the CRX) Fuel DSM 450cc (will probable have to upgrade these when the boost goes up to 15+ psi) webro 255 fuel pump P28 ECU with chrome pro Plus I'm redoing the down pipe 2.5" with smother bends and better ground clearance. My entire exhaust is 2.5 and is strait pipes to a Flowmaster axle back. Right now to rebuild the motor with the parts I want is at about $2500 + any machine work that needs to be done. What do you think of this setup or do you recommend any other parts. |
Re: Well I blew my motor. Researching a new setup.
Originally Posted by 90crxowner
Motor is a D16Z6 Block Vitara pistons 8.5:1CP (Get them from Fjt, he will be able to point you in the right way) Not sure on the rings yet (Vitaras are cast pistons) Eagle rods ACL rod and main bearings (OEM are better) ARP head and rod bolts (Eagles come with arp rod bolts) Head already P&P Crower stage 2 turbo cam Skunk 2 springs and titanium retainers Skunk 2 valves Turbo TD05 14B (may upgrade to a 16G) (Get away from dsm turbos) Intake HKS air filter 65MM JG throttle body (Chris the mod would be cheaper) stock Z6 intake manifold ported to match the throttle body (Chris the mod does a killer port job/ intake spacer) 3 bar map sensor Ebay intercooler kit (flows really good and is the perfect size for the CRX) (Dont follow to good, it is cheap cdm stuff, and piping fits like ----) Fuel DSM 450cc (will probable have to upgrade these when the boost goes up to 15+ psi) (Only if your over 300hp) webro 255 fuel pump P28 ECU with chrome pro BTW Skankfool= FAIL, ask Chris the mod for springs/ retainers to see if he has them for the sohc, I know he has them for the B. |
Re: Well I blew my motor. Researching a new setup.
Sux for you! ;)
Good luck with that thing Also support HMT sponsers and buy needed parts off them |
Re: Well I blew my motor. Researching a new setup.
sorry to hear about your motor, I would say your right on track, i was able to get 12s in my CRX with a 14b and low 12s with a big16g on my old z6, i would suggest you just get a ebay big16g , mine was fine and made 300 whp with 450 cc injectors. i did upgrade later to a bastard 20g before i sold the car and that dropped me to mid 11s.
|
| All times are GMT -5. The time now is 08:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands