Welding turbine blade fins (pics)
I was sent this by another friend....it makes me embarrassed to have an mx6...i mean jesus ------- christ
http://www.mx6.com/forums/2g-mx6-for...turbo-mod.html |
Re: Welding turbine blade fins (pics)
kinda funny, sounds kinda like a supercharger
|
Re: Welding turbine blade fins (pics)
i just threw up
|
Re: Welding turbine blade fins (pics)
now that is ghetto, I just hope it was a pos turbo to start with
|
Re: Welding turbine blade fins (pics)
what a retard
|
Re: Welding turbine blade fins (pics)
Originally Posted by Eville140
now that is ghetto, I just hope it was a pos turbo to start with
|
Re: Welding turbine blade fins (pics)
that has to hurt top end power also, if it can hold up to a redline pull
|
Re: Welding turbine blade fins (pics)
I hope one of those blades breaks off and goes into his eyeball :X
|
Re: Welding turbine blade fins (pics)
I love the birdshit welds on it all too. Wonder how much that wheel weighs as opposed to before he fuc.. i mean modified it....
|
Re: Welding turbine blade fins (pics)
I wonder what that did to the compressor map...
Im suprised it held together for one pull into boost. The forces on the blades would be a lot i would think. |
Re: Welding turbine blade fins (pics)
Shoulda used JB weld :6
|
Re: Welding turbine blade fins (pics)
wow just wow
he burned through one of the blades, amazing, absolutely amazing. those chinese turbos cant be that bad if that thing is still running.... |
Re: Welding turbine blade fins (pics)
Certainly a reactionary post, great if he's trolling.
OTOH, he killed what looked to be a perfectly good .57 T04E. :-\ |
Re: Welding turbine blade fins (pics)
Wow .. that musta doubled the HP !! SWEET MAN ! i'm gonna go right outside and do that to my turbo :S as a matter of fact, any one got a lame turbo i can make awsome by welding some more fins on too ?! maybe make a Quad intake impeller setup, !! that would be some MAD CDM stuffz YO O0
What an idiot ! what in the ---- was this guy thinking ? you have to set things up on your CRANKSHAFT that spins, maybe 1/32 of that speed, and ....never mind, there's no point on pointing out that he's ------- STUPID. |
Re: Welding turbine blade fins (pics)
LOL, radar, thats ------- classic. that guy takes the cake! i guess at 5psi on that engine it wont be doing more than a third its max rpm, but even that is probably going to be enough for some major disaster! i cant wait to see the stills of the aftermath!
ROTFLMAO |
Re: Welding turbine blade fins (pics)
Originally Posted by Joseph Davis
Certainly a reactionary post, great if he's trolling.
OTOH, he killed what looked to be a perfectly good .57 T04E. :-\ I've answered a few of this guy's threads on mx6.com's f/i forum (don't go there...its filled with ------- morons for the most part) and I am very surprised that car still runs at all! Hell...ask rebel2k4 (turbopathfinder) he knows how dumb many of those guys are. |
Re: Welding turbine blade fins (pics)
No, I meant the guy who welded the turbine.
|
Re: Welding turbine blade fins (pics)
lol after his right up next thing you know ssac will have them for sale like that new and improved :1 ---- they'll probably cheap it out even more and use jb weld
|
Re: Welding turbine blade fins (pics)
shhhhh rebel isnt rebel here, hes kltmx3 ;-)
|
Re: Welding turbine blade fins (pics)
WTF!?! I wonder what a dynamic spin balancer would read on that CHRA. I'd say something like that could win a person the Darwin Award.
|
Re: Welding turbine blade fins (pics)
wow i'm sure thats perfectly balanced :1
|
Re: Welding turbine blade fins (pics)
I hope it frags and he gets some metal in his engine for being a fagot.
|
Re: Welding turbine blade fins (pics)
Ha....this must have ended up on hondatech...as the entire car world seems to know about it....
Even a paintball forum??? |
Re: Welding turbine blade fins (pics)
Stupidity=fame
Paris Hilton Carlos Mencia The list goes on and on. |
Re: Welding turbine blade fins (pics)
How long is this ------ post going to ever go away when FUCKS hmmm"like me keep trying to avoid posting to get rid of it" hmmmmmm
|
All times are GMT -5. The time now is 06:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands