I know I've seen them posted on here twice but can't find them.
Anyone know where they are?

Thanks

 

Gee, I don't know what I'd do without you.

I dont remember the bolts that I need to buy.
I also remember seeing something about a differnt bolt-up order to make things easier.

 

Found em' in case anyone else was searching

screws required for HF-DSM adapter:
1- M10x1.25mm thread pitch x 25mm long socket head cap screw
3- M8x1.25mm thread pitch x 35mm long set screws
3- M8 nuts
3- M8 lock washers
4- 3/8"-16UNC x 1" long socket head cap screws

Steps for Assembly
1. thread the 3 m8 set screws into the adapter.
2. place the adapter on the turbo.
3. thread the m10 screw into the turbo through the counterbored hole in the adapter
4. thread the lock washers and m8 nuts onto the set screws from the bottom side of the flange on the turbo.
5. tighten everything so that the port matches up on the turbo even.
6. thread the 4 3/8"-16 screws through the manifold and into the adapter.
7. tighten everything down.